Uniden TRU9466 English Owners Manual - Page 50
Transferring a Call, Answering a Transferred Call, int'com/hold], LINE1, ANSWER
![]() |
UPC - 050633260456
View all Uniden TRU9466 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Transferring a Call You can transfer a call from one station to another. ) During a call, press [int'com/hold]. The line key (LINE1 or LINE2 soft key) to be placed on hold will flash. The Call will be put on hold. Hold/Transfer All Handset #2 LINE1 OK LINE2 2) Use [ ] or [ ] to select the station you want to transfer the call to, then press the OK soft key.. The call will automatically be placed on hold, and a paging tone sounds. To cancel the transfer, press . [ /flash] or [ ] on the handset or press [ ] on the base. 3) When another station accepts the transferred call, you will be disconnected. If you want to rejoin the call, press the line key (LINE1 or LINE2 soft key) again. Answering a Transferred Call When a station receives a call transfer, it sounds a paging tone and shows the ID of the station that is paging. To accept the call transfer: ) Press [ /flash], [int'com/hold], or the ANSWER soft key from the handset (or press [ ], [int'com/hold], or the ANSWER soft key on the base). 2) After answering the page, if you want to accept the call and speak to the outside caller, press the corresponding soft key (LINE1 or LINE2). If you have multiple handsets, only the first handset to answer the transfer page will be connected to the call. If the transfer page is not picked up within one minute, the operation will be canceled. 49
![](/manual_guide/products/uniden-tru9466-english-owners-manual-029fa06/50.png)