Uniden UDW10055 English Owner's Manual - Page 11
Using the Menu
View all Uniden UDW10055 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Using the Menu To open the menu, press OK Use UP and DOWN to move the cursor Audio Vol Scan Time CAM1 CAM2 CAM3 CAM4 Pair CAM System Factory The selected item is highlighted Use LEFT and RIGHT 10 OFF ON 9 to scroll through the 11 options for the item ON ON ON 1 2 3 4 Brightness 10 TV out NTSC Power Save OFF Setup To open the Reset System Setup sub-menu, press OK To close the menu, press OK Item Audio Vol Scan Time CAM1 - CAM4 Pair CAM Use it to Adjust the volume of the audio from the camera. Choose a value from 0 (off) through 20 (maximum). Set the length of time the receiver spends on each active camera during a scan (see page 16) or activate quad display (see page 17). Turn each of the four camera channels On (enabled) or Off (disabled). Pair a camera to the selected channel (see page 14). System Setup sub-menu Brightness TV out Power Save Factory Reset Adjust the brightness of the display. Choose a value from 1 (min) through 15 (max). Change the video output format from NTSC (North America) to PAL (Europe). Turn on power save mode. If you set this field to Auto, the display turns off if it's idle for more than one minute. (The audio will remain active.) To turn the display back on, press OK. Reset the receiver to factory defaults. Any changes or settings will be lost. 11