Uniden VOYAGER English Owners Manual - Page 20
Registering FIPS Code
UPC - 050633500415
View all Uniden VOYAGER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Registering FIPS Code Six digit FIPS Codes are programmable in 15 channels, number 1~15 for NWR-SAME Weather Alert. If there is no data registered in location number 1, all of the signals are decoded. Contact the National Weather Service at 1-888-NWR-SAME for the FIPS Codes in the area of interest, or visit http://www.nws.noaa.gov/nwr/indexnw.htm 1 Press and hold the MEM/FIPS key for 1.5 seconds. 2 Select the channel, numbers 1~15, you want to program using the L or M key. 3 Press the MEM/FIPS key to enter the FIPS Code edit mode. 4 To enter the first digit of the code, change the left blinking digit on the display using the L or M key and press the MEM/FIPS key. The right digit starts to blink. 5 To enter the second digit of the code, change the right blinking digit on the display using the L or M key and press the MEM/FIPS key. The entered digit moves to the left and the right digit starts to blink. 6 Repeat step 5 for the remaining digits of the code. 7 After the last digit registers, the entered code appears on the display automatically for confirmation. 8 To exit from this mode, press and hold the MEM/FIPS key for 1.5 seconds. 9 Press UIC to clear the stored FIPS Code in the displayed location. • Pressing the MEM/FIPS key for more than 1.5 seconds in the middle of the above steps prevents registration. 18