Uniden WXI377 English Owners Manual - Page 9

GETTING STARTED B. Activate the handset before charging the battery The handset is powered by a rechargeable battery pack already installed in the handset's battery compartment. Before charging the battery for the fist time, push the pin for activation, located on the bottom of the handset (see label with instructions). Once activated, remove the label and then place the handset in the base unit to charge. Make sure to charge for 15-20 hours without interruption (do not plug the telephone cord into the unit and wall jack during charge time). The base unit's LED light labeled (charge/in use) illuminates once the handset is placed in the base. The LED light will illuminate regardless if the battery pack is connected or not. If the base charge/in use LED light does not illuminate: • Check to see if the AC adapter is plugged into the base unit and the electrical wall outlet properly. (Use only the supplied AC adapter. Do not use any other AC adapter.) • Check to see if the handset is sitting correctly in the base. • Use only the Uniden (BT-909) rechargeable battery pack supplied with your cordless telephone. • Replacement batteries and/or rubber seals are also available through the Uniden Parts Department at (800) 554-3988, Monday thru Friday from 8:00 a.m. to 5:00 p.m. or online at www.uniden.com www.uniden.com GETTING STARTED [ 9 ]