Via EPIA-CN10000EG User Manual - Page 29

Clear Cmos, Clear_cmos, Spdif/comp Select, Spdif_sel

Get Via EPIA-CN10000EG - VIA Motherboard - Mini ITX PDF manuals and user guides View all Via EPIA-CN10000EG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Installation JUMPERS The mainboard provides jumpers for setting some mainboard functions. This section will explain how to change the settings of the mainboard functions using the jumpers. Clear CMOS: CLEAR_CMOS The onboard CMOS RAM stores system configuration data and has an onboard battery power supply. To reset the CMOS settings, set the jumper on pins 2 and 3 while the system is off. Return the jumper to pins 1 and 2 afterwards. Setting the jumper while the system is on will damage the mainboard. Clear Setting Clear CMOS setting Keep CMOS setting 1 2 3 OFF ON ON ON ON OFF 123 Keep 123 WARNING: Except when clearing the RTC RAM, never remove the cap on CLEAR_CMOS jumper default position. Removing the cap will cause system boot failure. Avoid clearing the CMOS while the system is on; it will damage the mainboard. SPDIF/COMP Select: SPDIF_SEL This jumper is for selecting between SPDIF and RCA (composite) video. 24 Setting 1 2 3 4 RCA Composite ON ON OFF OFF SPDIF OFF OFF ON ON RCA 13 24 SPDIF 13 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Installation
21
J
UMPERS
The mainboard provides jumpers for setting some mainboard functions.
This
section will explain how to change the settings of the mainboard functions
using the jumpers.
Clear CMOS:
CLEAR_CMOS
The onboard CMOS RAM stores system configuration data and has an
onboard battery power supply.
To reset the CMOS settings, set the jumper
on pins 2 and 3 while the system is off.
Return the jumper to pins 1 and 2
afterwards.
Setting the jumper while the system is on will damage the
mainboard.
Setting
1
2
3
Clear CMOS setting
OFF
ON
ON
Keep CMOS setting
ON
ON
OFF
WARNING:
Except when clearing the RTC RAM, never remove the
cap on CLEAR_CMOS jumper default position.
Removing the cap will
cause system boot failure.
Avoid clearing the CMOS while the system
is on; it will damage the mainboard.
SPDIF/COMP Select:
SPDIF_SEL
This jumper is for selecting between SPDIF and RCA (composite) video.
Setting
1
2
3
4
RCA Composite
ON
ON
OFF
OFF
SPDIF
OFF
OFF
ON
ON
Clear
1
3
2
Keep
1
3
2
RCA
1
3
2
4
SPDIF
1
3
2
4