Via EPIA-SP8000E User Manual - Page 67
Onboard IDE Channel 1 and 2, IDE Prefetch Mode, OnChip SATA
View all Via EPIA-SP8000E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
BIOS Setup INTEGRATED PERIPHERALS SuperIO Device Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals [Press Enter] Item Help Onboard IDE Channel 1 Onboard IDE Channel 2 IDE Prefetch Mode OnChip SATA SATA Mode AC97 Audio VIA OnChip LAN Onboard LAN Boot ROM [Enabled] [Enabled] [Enabled] [Enabled] [IDE Controller] [Auto] [Enabled] [Disabled] Menu Level Select IDE controller for install Win2000 / WinXP on your SATA Hard Driver. Otherwise, select SCSI controller for Win98SE / WinMe installation. OnChip USB Controller OnChip EHCI Controller [All Enabled] [Enabled] : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General F7: Optimized Defaults Help Onboard IDE Channel 1 and 2 The integrated peripheral controller contains an IDE interface with support for two IDE channels. Setting Enabled Disabled Description Activates each channel separately Deactivates IDE channels IDE Prefetch Mode This allows the hard disk controller to use the fast block mode to transfer data to and from the hard disk drive. Block mode is also called block transfer, multiple commands or multiple sector read / write. Setting Enabled Disabled Description Block mode Standard mode OnChip SATA Settings: [Enabled, Disabled] 59