Vaddio PCC Premier PCC Premier Installation - Page 6

Installation Guide for PCC Premier Precision Camera Controller Installation This section covers how to install and connect the controller. It also provides safety information and other guidance related to installing the controller. Don't Void Your Warranty! Caution This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate protective enclosure. Do not allow it to come into contact with any liquid. Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these things happen, return it to Vaddio for safety and functional testing. Learn more at www.vaddio.com/products. Operation, Storage, and Care For smears or smudges on the product, wipe with a clean, soft cloth. Do not use any abrasive chemicals. Keep this device away from food and liquids. Do not operate or store the device under any of the following conditions: n Temperatures above 40°C (104°F) or below 0°C (32°F) n High humidity, condensing or wet environments n Inclement weather n Severe vibration n Dry environments with an excess of static discharge Do not attempt to take this product apart. There are no user-serviceable components inside. Cabling Notes RS-232 cables may be up to 500 ft (152.4 m). For RS-232 cabling, use Cat-5e or better cable and standard RJ-45 connectors (568B termination). We recommend using high-quality connectors and a high-quality crimping tool. Note Do not use pass-through RJ-45 connectors. These can cause intermittent connections and degraded signal quality, resulting in problems that may be hard to diagnose. Use standard RJ-45 connectors and test all cables for proper pin-outs and continuity before you connect them to Vaddio products. 4