Vaddio RoboSHOT 12 RoboSHOT 12 and 30 QCCU System Manual - Page 12

RoboSHOT HD Cameras ROBOSHOT AND QUICK-CONNECT UNIVERSAL CCU CONTROL MENUS The RoboSHOT cameras have individual firmware that auto loads when the camera is plugged in to the Universal CCU and the CCU is turned on (Note: Always turn the camera on first so when the CCU wakes up, it will recognize the RoboSHOT). The menus are organized as follows: Menu Organization Main Control Menu 8-Most used Controls displayed Shutter and Noise Reduction Menu Wide Dynamic Range Menu CAT-5 Adjust Menu With Skew, Color Space Y-Gain and Six preset Scene Version Info Menu LED Display Menu For set up of front panel LED display Image: Main Menu Page The Main Menu screen shows eight (8) prominent parameters at a time. These controls are directly related to the front panel buttons allowing for quick change access. Simply touch the button of the control to be adjusted, and spin the rotary encoder and watch the value of the control on the display change in real-time. This screen does not need a cursor since the control relates directly to a front panel button. CAT-5 CCU RED BLUE CHROMA BRIGHT For this Menu, put Dip Switch 5 UP LCD Display Adjustment Menu RoboSHOT 30 65 GAMMA 75 DETAIL 08 IRIS 50 GAIN 48 04 AUTO AUTO Image: Shutter and Noise Reduction Menu Access to the shutter speed is allowed in this menu. For the most part, it can be left at the default unless challenging or funky lighting demands the use of the shutter. On this screen and the rest, the cursor is the "@" sign and the ">" appears as the parameter is select and adjusted. Touch cancel to return to the cursor mode. CAT-5 CCU @Shutter NR RoboSHOT 30 60 2 Image: Wide Dynamic Range Menu CAT-5 CCU The controls on this screen work together to provide wide RoboSHOT 30 dynamic range (WDR. The controls are used in conjunction @WIDE DYNAMIC RANGE with the Auto Iris Mode (auto iris has to be on to use WDR). DISPLAY BRIGHTNESS LEVEL OFF 3 The WDR controls include: Wide Dynamic Range: ON/OFF BRIGHTNESS COMPENSATION 2 COMPENSATION LEVEL 1 Display Brightness Level: 0 - 6, 0: Dark, 6: Bright Brightness Compensation: 0 - 3, 0: Very Dark, 1: Dark, 2: Standard, 3: Bright Compensation Level 0 - 2, 0: Low, 1: Medium, 2: High Image: Cat-5 Adjustment Menu Page The Cat-5 Adjustment Menu allows the operator to adjust CAT-5 CCU RoboSHOT 30 the skew of the Cat-5 Cable, the color space of the HDMI output, Y-Gain and the Scene Configuration.  Adjust the skew of the Cat-5 cable (range of 1 to 16) to compensate for differing lengths of the Cat-5 cable pairs between the camera and CCU. This setting will usually @Skew HDMI YGain 8 Scene Config YCbCr > 1: AUTO Def be best in the middle of the range of skew numbers which pass acceptable video.  Set the HDMI Color Space to YCbCr for HDMI and to sRGB for DVI-D output.  The Y-Gain is for adjusting the video ±10 IRE at all outputs as needed for associated video equipment.  Preset Lighting Scene Configurations offer sample settings for fluorescent, incandescent and outdoor lighting environments. Choose the scene (shown in the Screen Config description below) which looks best for the situation and fine tune from there. RoboSHOT HD Cameras - Document Number 342-0797 Rev A Page 12 of 48