Vaddio TRIO Ceiling Mic Array - White TRIO MIC and TRIO MIC I/O Tech Spec - Page 1

TRIO Mic I/O and TRIO Mics Breakout Interface for use with TRIO Acoustic Echo Canceling Microphones Overview: The Vaddio™ TRIO Mic I/O interface enables the TRIO Acoustic Echo Canceling Microphones to be used with any professional DSP audio mixer. Connect the TRIO Ceiling or Table Mics to the TRIO Mic I/O interface and instantly make any mixer capable of Acoustic Echo Cancellation for use in conferencing applications. Vaddio TRIO Table and Ceiling Microphones incorporate SmartMic technology along with built-in DSPs for the ultimate in simple control and maximum performance. The technology integrates automatic microphone mixing, wideband echo cancelation, noise reduction, and automated gain control into the microphones and eliminates the need for super expensive, hard to program and operate conferencing mixers. Like many Vaddio products, a simple Cat-5/5e/6 UTP cable connection and no clumsy software configuration makes the TRIO microphones as simple to install as traditional boundary or celling microphones. The TRIO Mic I/O connects up to four TRIO Microphones over Cat-5 cables. The Cat-5 cable carries power to the microphone and returns the processed audio from the TRIO mics. The TRIO Mic I/O has four (4) individual line level balanced outputs, each representing the echo canceled audio channel from the individual TRIO mics. An Acoustical Echo Cancellation (AEC) Reference input channel is included on the rear panel for connection to the far-end audio signal coming into the conference room. The AEC Reference channel is needed for the TRIO mic to keep the far-end audio from going into the room mics and echoing back to the far-end. The TRIO Table and Ceiling microphones each have three (3) mic elements, provide a 360º pickup pattern and connect to the TRIO Mic I/O with a Cat-5 cable for power and audio. The TRIO Ceiling Mic has a plenum safe sealed enclosure for the electronics and a 36" (914.4mm) drop cable to a 2.5" (63.5mm) spherical shaped mic array. The TRIO Ceiling Mics come in either a dark charcoal or a white version. The combination of the TRIO Mic I/O, the TRIO Table Mics or the TRIO Ceiling Mics turns any mixer into an automatic mixer with wideband echo cancelation, noise reduction, and automated gain control. SPECIFICATIONS - TRIO Mic I/O Interface Part Numbers Audio Specs Line Outputs AEC Reference Input TRIO Mic Ports Power Supply Power Consumed Operating Temp. Dimensions / Weight Accessories Opt. Accessories 999-8535-000 (North America), 999-8535-001 (Int'l) Frequency Response: 20 HZ to 20KHZ, Dynamic Range: >90dB, THD + Noise: < 0.02% Four (4) 3-Pin Balanced, Line Level Outputs One (1) 3-Pin Balanced, Line Level Input Connectors: Four (4) RJ 45-F, Proprietary Interface with audio, power & control, 100' (30.48m) Cat-5 cable distance 18 VDC, 2.75 Amp, Positive Center Maximum of 40 Watts 32° to 104° F (0° to 40° C) / 20% to 80% Relative Humidity 8.375" (212.7mm) W x 1.72"" (43.7) H x 6.0" (152.4mm) D / 1.45 lbs. (0.657708956434 kg) Included: Power Supply, Five (5) 3-Pin 5.0mm Phoenix-type Connectors Optional: Rack Mount Kit 1-RU: 998-6000-004 (one long ear and one short ear) @2015 Vaddio - All Rights Reserved, Phone: 763-971-4400, Toll Free: 800-572-2011, FAX: 763-971-4464 Page 1 of 2