Vantec NST-400MX-S3 User Guide - Page 13
NST-400MX-S3, NST-400MX-S3R
View all Vantec NST-400MX-S3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
JBOD Mode: This mode concatenates a series of physical drives as a single large volume; Hard Drive 1 and 2 are combined into a storage capacity that is equal to the sum of each of the physical hard drives 1 and 2. Switching to this mode will prompt to initialize and format the hard disks. If you choose to add a second hard disk at a later time, you will need to format the entire array of disks again ( figure 6-C) ( figure 6-D) NOTE: All data previously stored on the hard drive will be lost! Please back up all data to a separate storage before continuing. NST-400MX-S3 NST-400MX-S3R ON 1 2 JBOD Mode JBOD Mode ( figure 6-C) JBOD 500GB NST-400MX-S3 Port 0 Port 1 JBOD 1000GB NST-400MX-S3 Port 0 Port 1 JBOD 500GB NST-400MX-S3R Port 0 Port 1 JBOD 1000GB NST-400MX-S3R Port 0 Port 1 Drive A 250GB Drive A 250GB Equal hard drives Drive A 250GB Drive A 750GB Unequal hard drives Drive A 250GB Drive A 250GB Equal hard drives ( figure 6-D) Mode Configuration 11 Drive A 250GB Drive A 750GB Unequal hard drives