Vantec UGT-DH107U3 Manual - Page 7
Connect the USB cable from the USB Hub Type B, USB Link LED should
 |
View all Vantec UGT-DH107U3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Connect the power adapter (not included) to the USB Hub. The power LED should light up solid. Supplying external power is optional, however to ensure each USB port is fully powered, connecting external power is recommended. 2. Connect the USB cable from the USB Hub (Type B port) to the host computer system. 3. The operating system should detect the Hub immediately and automatically install it. 4. Once installation is complete, USB devices should be able to be connected to the Hub and recognized. The USB Link LED should 5. Light up when a USB device is plugged in and detected. UGT-DH107U3 / UGT-DH104U3 Page 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
UGT-DH107U3 / UGT-DH104U3
Page 7
1.
Connect the power adapter (not included) to the USB
Hub. The power LED should light up solid. Supplying
external power is optional, however to ensure each
USB port is fully powered, connecting external power
is recommended.
2.
Connect the USB cable from the USB Hub (Type B
port) to the host computer system.
3.
The operating system should detect the Hub
immediately and automatically install it.
4.
Once installation is complete, USB devices should be
able to be connected to the Hub and recognized. The
USB Link LED should
5.
Light up when a USB device is plugged in and
detected.