Vantec UGT-PC20SR Flyer - Page 1
Vantec UGT-PC20SR - Serial PCI Host Card Manual
View all Vantec UGT-PC20SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
2-Port Serial PCI Compliant with PCI Local Bus Specification, Revision 2.3 Support 2 x UART serial ports Easy Plug and Play Automatic selects IRQ & I/O address Built-in 16C450/550 compatible UART On chip 256 byte FIFOs for transmit/receive Serial data transfer rate up to 115200bps PCI 32-bit 2 x DB9 male serial connectors Introduction: This UGT-PC20SR is part of a series of I/O card based on the PCI technology. It o ers TWO independent Serial Communication ports that enable the user a simple way to add serial ports to any computer. The card is design to meet PCI local bus speci cation rev. 2.3 and allow you to plug in two devices to a computer whether it be a Point of Sale terminals, modems, printers, scanners, cash registers, bar code readers, keypads, numeric displays, electrical scales, data acquisition equipment, and other serial devices for the PC and compatible systems. This card is easy to use and install with the standard or low pro le brackets virtually in any PC with all major operating systems. The I/O address and IRQ are automatically con gured to simplify the installation at the same time o ers a reliable and high performance solution for Serial Communication. Specifiactions: Model: Interface: Ports: Dimensions: UGT-PC20SR PCI 2 Serial Ports (DB9 Male) 122 x 56 x 22mm System Requirement Windows XP/Vista/7/8 (32/64 bit) Available PCI slot Package Contents 1 x 2-Port Serial (RS-232) PCI Host Card 1 x Driver CD 1 x User Manual 2 x Low Profile Brackets Send us an e-mail at: [email protected] All Registered Trademarks Belong To Their Respective Companies www.vantecusa.com Copyright © 2013 Vantec Thermal Technologies. All Rights Reserved.