Vantec UGT-PC312 User Guide - Page 6
New Hardware Wizard'.
 |
View all Vantec UGT-PC312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
New Hardware Wizard'. 2. Cancel the automatic driver installation and run the Setup.exe located on the Driver CD. Note: Setup.exe can also be found and downloaded from our website at www.vantecusa.com. 3. Run installer setup.exe on Driver CD "X:\UGT-PC312\" to have the latest driver for 32/64bit Windows. (where X is the drive path for your CD-ROM drive) 4. When installation of the driver is complete, please reboot the system as prompted to complete the driver installation. Note: When drivers have been successfully installed, you may check if installation was successful within the Device Manager where "NEC Electronics USB 3.0 Host Controller" will be shown. UGT-PC312 Page 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
UGT-PC312
Page 6
New Hardware Wizard'.
2.
Cancel the automatic driver installation and run the
Setup.exe located on the Driver CD.
Note: Setup.exe can also be found and downloaded
from our website at
www.vantecusa.com
.
3.
Run installer setup.exe on Driver CD “X:\UGT-PC312\” to
have the latest driver for 32/64bit Windows. (where X is the
drive path for your CD-ROM drive)
4.
When installation of the driver is complete, please reboot
the system as prompted to complete the driver installation.
Note: When drivers have been successfully installed,
you may check if installation was successful within the
Device Manager where “NEC Electronics USB 3.0
Host Controller” will be shown.