Vantec UGT-PCE10PL Flyer - Page 1
Vantec UGT-PCE10PL - Parallel PCIe Host Card Manual
View all Vantec UGT-PCE10PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
1-Port Parallel PCIe Compliant with PCI Express Specification 1.1 Supports x1, x4, x8, x16 PCI Express Bus Support 1 x UART serial ports Built-in 16C950 compatible UART 128 byte FIFO for transmit/receive Data transfer rate up to 115200bps Plug-n-Play, I/O address and IRQ assigned by BIOS Support Windows XP/Vista/7/8 Introduction: This UGT-PCE10PL is part of a series of I/O card based on the PCI Express technology. It o ers ONE LPT port that enables the user to connect parallel devices. The Parallel (LPT) port o er data transfer rate up to 1.5 Mbps with built-in ECP/EPP/SPP/BPP auto switching operation modes to give you maximum system performance and e ciency via DB25 pin female connector. This card is the best solution for your Centronics peripherals. The UGT-PCE10PL is design to be easy and simple to use for commercial, o ce and home use. This card is designed to meet PCI Express Speci cation and with the standard or low pro le brackets can be installed virtually in any PC with all major operating systems. The I/O address and IRQ are automatically con gured to simplify the installation at the same time o ers a reliable and high performance solution for Parallel Communication. Specifiactions: Model: Interface: Ports: Dimensions: UGT-PCE10PL PCIe 1 Parallel Ports (DB25 Female) 73 x 60 x 18mm System Requirement Windows XP/Vista/7/8 (32/64 bit) One available PCI Express slot Package Contents 1 x 1-Port Parallel PCIe Host Card 1 x Driver CD 1 x User Manual 1 x Low Profile Brackets Send us an e-mail at: [email protected] All Registered Trademarks Belong To Their Respective Companies www.vantecusa.com Copyright © 2013 Vantec Thermal Technologies. All Rights Reserved.