Vantec UGT-PCE20SR Flyer

Compliant with PCI Express Specification 1.1

Supports x1, x4, x8, x16 PCI Express Bus

Support 2 x UART serial ports

Built-in 16C950 compatible UART

256 byte FIFO for transmit/receive

Data transfer rate up to 230400bps

Plug-n-Play, I/O address and IRQ assigned by BIOS

Support Windows XP/Vista/7/8

This UGT-PCE20SR is part of a series of I/O card based on the PCI Express technology. It offers two independent Serial

Communication ports that enable you to connect serial devices like Point of Sale terminals, modems, printers, scanners,

cash registers, bar code readers, keypads, numeric displays, electrical scales, data acquisition equipment, and other serial

devices for the PC and compatible systems. This card is designed to meet PCI Express Specification and with the standard

or low profile brackets can be installed virtually in any PC with all major operating systems. The I/O address and IRQ are

automatically configured to simplify the installation at the same time offers a reliable and high performance solution for

Serial Communications.

Introduction:

Specifiactions:

System Requirement

Package Contents

Send us an e-mail at: [email protected]

All Registered Trademarks Belong To Their Respective Companies

Copyright © 2013 Vantec Thermal Technologies. All Rights Reserved.

www.vantecusa.com

Model:

Interface:

Ports:

Dimensions:

UGT-PCE20SR

PCIe

2 Serial Ports (DB9 Male)

74 x 95 x 18mm

Windows® XP/Vista/7/8 (32/64 bit)

One available PCI Express slot

1 x 2-Port Serial (RS-232) PCIe Host Card

1 x Driver CD

1 x User Manual

2 x Low Profile Brackets