Vantec UGT-PCE20SR Flyer - Page 1

2-Port Serial PCIe Compliant with PCI Express Specification 1.1 Supports x1, x4, x8, x16 PCI Express Bus Support 2 x UART serial ports Built-in 16C950 compatible UART 256 byte FIFO for transmit/receive Data transfer rate up to 230400bps Plug-n-Play, I/O address and IRQ assigned by BIOS Support Windows XP/Vista/7/8 Introduction: This UGT-PCE20SR is part of a series of I/O card based on the PCI Express technology. It o ers two independent Serial Communication ports that enable you to connect serial devices like Point of Sale terminals, modems, printers, scanners, cash registers, bar code readers, keypads, numeric displays, electrical scales, data acquisition equipment, and other serial devices for the PC and compatible systems. This card is designed to meet PCI Express Speci cation and with the standard or low pro le brackets can be installed virtually in any PC with all major operating systems. The I/O address and IRQ are automatically con gured to simplify the installation at the same time o ers a reliable and high performance solution for Serial Communications. Specifiactions: Model: Interface: Ports: Dimensions: UGT-PCE20SR PCIe 2 Serial Ports (DB9 Male) 74 x 95 x 18mm System Requirement Windows® XP/Vista/7/8 (32/64 bit) One available PCI Express slot Package Contents 1 x 2-Port Serial (RS-232) PCIe Host Card 1 x Driver CD 1 x User Manual 2 x Low Profile Brackets Send us an e-mail at: [email protected] All Registered Trademarks Belong To Their Respective Companies www.vantecusa.com Copyright © 2013 Vantec Thermal Technologies. All Rights Reserved.