ViewSonic CDE5500-L CDE4600-L CDE5500-L User Guide English - Page 10
Mounting on a Wall
View all ViewSonic CDE5500-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1.4. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit. We recommend using a mounting interface that complies with UL1678 standard in North America. 400 Protective Sheet 400 Table 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2. Ensure you have all accessories for mounting this display. 3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation. 4. For the wall-mounting kit, use mounting screws and tighten them securely: Model CDE4600-L CDE5500-L VESA Size (mm) 400 × 400 400 × 400 Mounting Screws (X=Thickness of wall-mount plate) M6 × (20 + X) M6 × (24 + X) Caution: To prevent the display from falling: • To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or other natural disaster, be sure to consult the bracket manufacturer for installation location. Enclosure Ventilation Requirements To allow heat to disperse, leave space between surrounding objects as shown in the diagram below. 100 mm 100 mm 100 mm 100 mm NOTE: W hen installing the display on a wall, please consult a professional technician for proper installation. We accept no liability for installations not performed by a professional technician. 2