ViewSonic CDE5510 CDE5510 User Guide English - Page 21
Operation - user manual
View all ViewSonic CDE5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4. Operation NOTE: T he control button described in this section is mainly on the remote control unless specified otherwise. 4.1. Start-up and initial Setting 4.1.1. Welcome Select your language and tap "Start". 4.1.4. Setup Complete The initial settings are completed. Press "Finish" and display will reboot automatically. 4.1.2. Network Setting Tape "Next" button to next page and it will show. 1. Connection Type : DHCP / Static IP 2. IP Address 3. Netmask 4. DNS Address 5. Gateway You also can tape "Skip" to configure later 4.1.3. Signage Display Settings User can import the setting file from SD, USB or manual setting. User also can tape "Skip". Note: The setting file should be put on viewsonic folder in SD or USB and the file name is settings. db. 4.2. Watch the Connected Video Source 1. Press SOURCE button. 2. Press or button to select a device, then press OK button. 4.3. Change Picture Format You can change the picture format to suit the video source. Each video source has its available picture formats. The available picture formats depend on the video source: 1. Press FORMAT button to choose a picture format. • PC mode: {Full} / {4:3} / {Real} / {21:9}/ {Custom}. • Video mode: {Full} / {4:3} / {Real} / {21:9}/ {Custom} 12