ViewSonic CDM4900R CDM5500R User Guide English - Page 34

Monitor information Shows information about your display, including model number, serial number, operating hours and software version. DP version DisplayPort support mode. The options are: • {DP 1.1}: DP 1.1 single stream (clone mode). • {DP 1.2 SST}: DP 1.2 Single stream (clone mode). • {DP 1.2 MST}: DP 1.2 Multi-Stream NOTE: The DP version must be set the same for all daisy chain displays. Window selection Select the window for adjusting setting. The selected window will be highlight green border. Window selection will set to Main after power on. The options are: {Main}, {PIP} Rotation Set the rotation of Main/Sub/OSD Language Select the language used in the OSD menu. The options are: {English}/{Deutsch Français}/{Italiano}/{Español}/{Pyccкий}/ {Polski}/{Türkçe QR Code Display QR code of Viewsonic website for more information. Configuration2 reset Reset all settings in Configuration2 menu to the factory preset values. 5.1.7. Advanced menu Configuration 2 Advanced option Input resolution IR control Keyboard control Tiling Off timer Date and time Schedule HDMI with One Wire Auto signal detection Power save Auto Action Action Action Off Action Action Off Action Mode 1 Input resolution Set the resolution of the VGA input. This is only required when the display is unable to detect the VGA input resolution correctly. NOTE: This item is functional for VGA input only. The options are: • {1024x768 / 1280x768 / 1360x768 / 1366x768} • {1400x1050 / 1680x1050} • {1600x1200 / 1920x1200} • {Auto}: Determines the resolution automatically. The selected settings will become effective after turning off the power and turning it on again. IR control Select the operation mode of the remote control when multiple displays are connected via an RS232C connection. • {Normal} - All displays can be operated normally by the remote control unit. • {Primary} - Designate this display as the primary display for remote control operation. Only this display can be operated by the remote control. (In primary mode, IR key will always be processed regardless the monitor id). • {Secondary} - Designate this display as the secondary display. This display can not be operated by the remote control, and will only receive the control signal from the primary display via the RS232C connection. • {Lock All} / {Lock all but Volume} / {Lock all but Power}/{Lock all except PWR & VOL} - Lock the remote control function of this display. NOTE: To unlock IR control, press and hold the [Info] button on the remote control for more 6 (six) seconds. Keyboard control Choose to enable or disable the display keyboard (control buttons) function. • {Unlock} - Enable the keyboard function. • {Lock All} / {Lock all but Volume} / {Lock all but Power}/{Lock all except PWR & VOL} - Disable the keyboard function. NOTE: "Keyboard Control Lock Mode" This function completely disables the access to all Keyboard Control functions. To enable or disable the keyboard control lock, press both [VOL+]and [UP] buttons and hold down continuously for more than 3 (three) seconds. Tiling With this function you can create a single largescreen matrix (video wall) that consists of up to 225 sets of this display (up to 15-sets on the vertical and 15-sets on the horizontal sides). This function requires a daisy-chain connection. 26