ViewSonic CDP4737-L CDP4237-L, CDP4737-L, CDP5537-L User Guide - Page 27

NOTE yIf you want to access the Internet directly on your display, the internet connection should always be on. yIf you cannot access the Internet, check the network conditions from a PC on your network. yWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. yIf you do not complete the network settings, the network may not work properly. Tips for Network setting yUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector. yMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. yDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP. yViewSonic is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions associated with your internet connection, or other connected equipment. yViewSonic is not responsible for problems within your internet connection. yYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed. ySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection. yAny fees charged by an ISP including, without limitation, connection charges are your responsibility. yA 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to connect the display. yA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this display may not be allowed to connect when a PC is already connected.) yThe use of a "Router" may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly. Network Status 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to NET- WORK and press OK. 3 Press the Navigation buttons to select Net- work Status. 4 Press OK to check the network status. 5 When you are finished, press EXIT. Option Setting Test Close Description Return to the network setting menu. Test the current network status after setting the network. Return to the previous menu. 23