ViewSonic CDP5537-L CDP4237-L, CDP4737-L, CDP5537-L User Guide - Page 49

OPTION settings 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to OPTION and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. OPTION Language Power Indicator ISM Method DPM Select Fail Over Factory Reset Set ID Tile Mode PIP/PBP Key Lock Product/Service Info. Portrait Mode Move OK The available option settings are described in the following: Setting Language Power Indicator ISM Method DPM Select Fail Over Factory Reset Set ID Description To choose the language in which the control names are displayed. Use this function to set the power indicator on the front side of the product to On or Off. A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods could result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for a long period of time. Setting Normal Leave on normal if you don't foresee image burn in being a problem. Orbiter Inversion White Wash May help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. This function inverts the panel color of the screen. The panel color is automatically inverted every 30 minutes. White wash fills the screen with solid white. This helps removes permanent images burned into the screen. A permanent image may be impossible to clear entirely with white wash. A user can choose to turn the power saving mode on / off. If there is no input signal, it automatically switches to another input with signal. Setting Off Auto Manual Stops auto switch of the input source. Switches to another input source with video signal if no video signal comes from the current input source. Selects the priority of input source for auto switch. When several input sources are found, the input source with a higher priority will be selected. Select this option to return to the default factory settings. You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1 to 99) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. 45