ViewSonic CDP9800 CDP9800 User Guide English - Page 30

DP Version The option are: {DP 1.1} / {DP 1.2}. The default is {DP 1.1}. Human sensor Set the display to turn on backlight if it does sensor human and turn off backlight after an amount of time specified The options are: {Off, 10 ~ 60} minutes. HDMI edid The option are: {HDMI 1.4} / {HDMI 2.0}.The default is {HDMI 1.4}. NOTE: HDMI 2.0 option is to support HDMI 2.0 equipment use. Configuration2 reset Reset all settings in Configuration2 menu to the factory preset values. 5.2.7. ADVANCED OPTION menu 1PIP 2 3 Input resolution IR control Tiling Date and time Off timer Schedule OPS settings APM Advanced option Normal Off Always on On MENU :Exit :Move SET :Select Input resolution Set the resolution of the VGA input.This is only required when the display is unable to detect the VGA input resolution correctly. NOTE: T his item is functional for VGA input only. The options are: • {1024x768 / 1280x768 / 1360x768 / 1366x768} • {1400x1050 / 1680x1050} • {1600x1200 / 1920x1200} • {Auto}: Determines the resolution automatically. The selected settings will become effective after turning off the power and turning it on again. IR control Select the operation mode of the remote control when multiple displays are connected via an RS232C connection. • {Normal} - All displays can be operated normally by the remote control unit. • {Lock All} / - Lock the remote control function of this display. To unlock, press and hold the [ ] INFO button on the remote control for 5 (five) seconds. Tiling With this function you can create a single largescreen matrix (video wall) that consists of up to 100 sets of this display (up to 10-sets on the vertical and 10-sets on the horizontal sides). This function requires a daisy-chain coection. Tiling H monitors V monitors Position Frame comp. Enable Switch on delay 1 1 1 Yes No Auto Example: 2 x 2 screen matrix (4 displays) H MONITORS = 2 displays V MONITORS = 2 displays H MONITORS V MONITORS 1 2 Position 34 20