ViewSonic DP701W4WH Digital Photo Frame DP701W4 User Guide, English - Page 7

USB, Connected to PC Installation - manual

Page 7 highlights

The screen will return to Home Menu. 5. USB, Connected to PC Installation When mini-USB connector is connected to a PC, the PC will serve as a host device and DP701WF will serve as an external storage device to the PC (like a card reader). From DP701WF's Side 5-1 Message of "Connected; Will return to normal operation after disconnection" will pop up. Fig. 5-1 USB is connected to PC From PC's Side The PC setup is same as a standard USB storage device. Windows XP should be able to automatically recognize DP701W4 as a "USB Mass Storage Device" without performing any manual installation. However, in case of driver is not automatically installed, the following process will take place: 5-2 Select "No, not this time" when prompt to connect to Windows update. If Windows fails to locate the proper driver in the installation. Select "Yes, this time only". This operation requires an internet connection. Fig. 5-2 Windows New Hardware Wizard, Screen 1 Click "Next >" to continue. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

6
The screen will return to Home Menu.
5.
USB, Connected to PC Installation
When mini-USB connector is connected to a PC, the PC will serve as a host device and DP701WF will serve as an
external storage device to the PC (like a card reader).
From DP701WF’s Side
Fig. 5-1 USB is connected to PC
5-1 Message of “Connected; Will return to
normal operation after disconnection” will
pop up.
From PC’s Side
The PC setup is same as a standard USB storage device. Windows XP should be able to automatically recognize
DP701W4 as a “USB Mass Storage Device” without performing any manual installation. However, in case of
driver is not automatically installed, the following process will take place:
Fig. 5-2 Windows New Hardware Wizard, Screen 1
5-2 Select “No, not this time” when
prompt to connect to Windows update.
If Windows fails to locate the proper
driver in the installation. Select “Yes, this
time only”. This operation requires an
internet connection.
Click “Next >” to continue.