ViewSonic LS550WH - 3000 LED Lumens WXGA Short Throw LED Projector w/ 125% Rec. - Page 60
Language, Projector Position, Menu Settings, High Altitude Mode, Quick Auto Search, Security Settings
View all ViewSonic LS550WH - 3000 LED Lumens WXGA Short Throw LED Projector w/ 125% Rec. 709 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Menu Option Description Language Sets the language for the On-Screen Display (OSD) Menu. Projector Position Selects a proper position for the projector. Menu Settings Menu Display Time Sets the length of time the OSD Menu will remain active after your last interaction. Menu Position Sets the OSD Menu's position. High Altitude Mode We recommend you use the High Altitude Mode when your environment is between 1,500 m to 3,000 m above sea level, and ambient temperature is between 0°C-30°C. NOTE: • Do not use High Altitude Mode if your environment is between 0 to 1,499 m, and the temperature is between 0°C to 35°C. If used, the projector will become over cooled. • Using "High Altitude Mode" may cause more operating noise, as the fan speed will be increased to improve cooling and performance. Quick Auto Search Allows the projector to automatically search for the signals. Security Settings See "Using the Password Function" on page 21. Panel Key Lock Locks the control keys on the projector. Remote Control Code Sets the remote control code for this projector (between 1~8). When multiple adjacent projectors are in operation at the same time, switching the codes can prevent interference from other remote controls. After the remote control code is set, switch to the same ID for the remote control to control this projector. To switch the code for the remote control, press ID set and the number button corresponding to the remote control code together for 5 seconds or more. The initial code is set to 1. When the code is switched to 8, the remote control can control every projector. NOTE: If different codes are set on the projector and remote control, there will be no response from the remote control. When that happens, a message will display to remind you to switch the code for the remote control. Control Method Allows you to select a preferred control port: through the RS-232 port or the USB port. When selecting USB, USB A Power will be switched to Off automatically. 60