ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio
ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio Manual
 |
View all ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio manual content summary:
- ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 1
a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also su equipo lea cu idadosamente las instrucciones en este manual" Model No. VS18176 Model Name: LS600W - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 2
Thank you for choosing ViewSonic® As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world's expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 3
Precautions before you start using the projector. • Keep this user guide in a safe place for later reference. • Read all warnings and follow all instructions. • Allow at least 20" (50 cm) clearance around , disconnect it from the power supply and call your local service center to have the projector - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 4
. • Disconnect the power cord from the AC outlet if the projector is not being used for a long period of time. • Refer all servicing to qualified service personnel. CAUTION: Possibly hazardous optical radiation is emitted from this product. As with any bright light source, do not stare into the beam - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 5
Safety Precautions - Ceiling Mounting Please read the following Safety Precautions before you start using the projector. If you intend to mount the projector on the ceiling, we strongly recommend that you use a proper fitting projector ceiling mount kit and that you ensure it is securely and safely - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 6
Contents Safety Precautions - General 3 Introduction 10 Features...10 Package Contents 10 Product Overview 11 Projector...11 Controls and Functions 11 Connection Ports...12 Remote Control...13 Controls and Functions 13 Remote Control Effective Range 14 Replacing the Remote Control Batteries - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 7
Environment 34 Configuring the LAN Control Settings 34 Controlling the Projector through a Web Browser 36 About Crestron e-Control 40 PJLink™, SNMP, AMX and Xpanel Formats Supported 43 7 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 8
Table...76 Address Code...77 RS-232 Command Table 78 Pin Assignment...78 Interface...78 Command Table...78 Glossary...87 Troubleshooting...90 Common Problems 90 LED Indicators...91 Maintenance...92 General Precautions 92 Cleaning the Lens 92 Cleaning the Case 92 Storing the Projector 92 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 9
Regulatory and Service Information 94 Compliance Information 94 FCC Compliance Statement 94 Industry Canada Statement 94 CE Hazardous Substances 96 Product Disposal at End of Product Life 96 Copyright Information 97 Customer Service 98 Limited Warranty 99 Mexico Limited Warranty 102 9 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 10
enabling side projections • Comprehensive LAN control for efficient management* Package Contents • Projector • Remote Control & Batteries • Power Cord • Quick Start Guide • Video Cable NOTE: The power cord and video cables included in your package may vary depending on your country. Please - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 11
sensor Remote IR sensor Projection Lens Key Description [ ] Power Toggles the projector between standby mode and Power On. [ / / / ] Keystone Manually corrects distorted images resulting from an angled Keys projection. [/ / /] Selects the desired menu items and makes adjustments when Left - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 12
Connection Ports 1 23 RJ-45 AUDIO OUT AUDIO IN 45 6 78 9 HDMI 1 HDMI 2 COMPUTER IN USB 5V/1.5A OUT VIDEO (Service) RS-232 AC Power Cord Inlet Ceiling Mount Holes Security Slot Security Bar Adjuster Foot Port Description [1] RJ-45 LAN port. [2] AUDIO OUT Audio signal - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 13
off. the displayed image. Color Mode Displays the color mode Displays the source selection selection bar. bar. Magnifies the projected Manually corrects distorted picture size. images resulting from an angled projection. Reduces the projected picture size. Enacts the selected OSD Menu - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 14
. • Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • If the batteries are drained or if you will not be using the remote control for - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 15
Initial Setup This section provides detailed instructions for setting up your projector. Choosing a Location Personal preference and room layout will decide the installation location. Consider the following: • Size and Position of your - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 16
Projection Dimensions NOTE: See "Specifications" on page 70 for the native display resolution of this projector. • 16:10 Image on a 16:10 Screen • 16:10 Image on a 4:3 Screen (a) (e) (f) (c) NOTE: (e) = Screen / (f) = Center of Lens 16:10 Image on a 16:10 Screen (d) (b) (a) Screen Size in. mm - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 17
16:10 Image on a 4:3 Screen (a) Screen Size in. mm 30 762 40 1016 50 1270 60 1524 70 1778 80 2032 90 2286 100 2540 120 3048 150 3810 200 5080 250 6350 300 7620 (b) Projection Distance minimum maximum in. mm in. mm 33 833 39 999 44 1110 52 1332 55 1388 66 1666 66 1666 79 1999 77 1943 92 2332 87 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 18
176.6 145.6 Mounting the Projector NOTE: If you buy a third-party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate. 1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount. 2. Ensure the screws used to - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 19
Preventing Unauthorized Use The projector has several built-in security features to prevent theft, access, or accidental setting changes. Using the Security Slot To help prevent the projector from being stolen, use a security slot locking device to secure the projector to a fixed object. Below is an - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 20
Using the Password Function To help prevent unauthorized access or use, the projector offers a password security option. The password can be set through the On-Screen Display (OSD) Menu. NOTE: Make note of your password, and keep it in a safe place. Setting a Password 1. Press Menu to open the OSD - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 21
Changing the Password 1. Press Menu to open the OSD Menu and go to: SYSTEM > Security Settings > Change Password. 2. Press Enter, the message, 'INPUT CURRENT PASSWORD' will appear. 3. Enter the old password. ͫ If the password is correct, the message, 'INPUT NEW PASSWORD' will appear. ͫ If the - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 22
3 seconds. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local service center to decode the number. You may be required to provide proof of purchase documentation to verify that you are an authorized user of the - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 23
Making Connections This section guides you on how to connect the projector with other equipment. Connecting to Power 1. Connect the power cord to the AC IN jack at the rear - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 24
cable to the HDMI 1 or HDMI 2 port of your projector. RJ-45 AUDIO OUT AUDIO IN HDMI 1 HDMI 2 COMPUTER IN USB 5V/1.5A OUT VIDEO (Service) RS-232 24 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 25
Composite Video Connection Connect one end of a Video cable to the Video port of your video device. Then connect the other end of the cable to the VIDEO port of your projector. RJ-45 AUDIO OUT AUDIO IN HDMI 1 HDMI 2 COMPUTER IN USB 5V/1.5A OUT VIDEO (Service) RS-232 25 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 26
the cable to the MONITOR OUT port of your projector. RJ-45 AUDIO OUT AUDIO IN HDMI 1 HDMI 2 COMPUTER IN USB 5V/1.5A OUT VIDEO (Service) RS-232 26 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 27
Connecting to Audio The projector is equipped with speakers, however, you can also connect external speakers to the AUDIO OUT port of the projector. NOTE: The audio output is controlled by the projector's Volume and Mute settings. 27 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 28
message, 'No Signal' will appear. First Time Activation If the projector is activated for the first time, select your OSD language following the on-screen instructions. 28 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 29
Shutting Down the Projector 1. Press the Power or Off button and a confirmation message will appear to prompt you to press the Power or Off button a second time. Additionally you can press any other button to cancel. NOTE: If you do not respond in a few seconds after the first press, the message - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 30
selected by pressing one of the source selection buttons on the remote control, or by cycling through the available input sources. To manually select the input source do the following: 1. Press Source, and a source selection menu will appear. 2. Press / until your desired signal is selected and - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 31
Adjusting the Projected Image Adjusting the Projector's Height and Projection Angle The projector is equipped with one (1) adjuster foot. Adjusting the foot will change the projector's height and the vertical projection angle. Carefully adjust the feet to fine tune the projected image's position. - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 32
Correcting Keystone Keystoning refers to the situation where the projected image becomes a trapezoid due to angled projection. To correct this, besides adjusting the height of the projector, you may also: 1. Use the keystone keys on the projector or remote control to display the keystone page. 2. - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 33
Hiding the Image In order to draw the audience's full attention to the presenter, you can press Blank on the projector or remote control to hide the screen image. Press any key on the projector or remote control to restore the image. CAUTION: Do not block the projection lens as this could cause the - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 34
the Projector through a LAN Environment The projector supports Crestron® software. With correct settings for the . RJ-45 AUDIO OUT AUDIO IN HDMI 1 HDMI 2 COMPUTER IN USB 5V/1.5A OUT VIDEO (Service) RS-232 Configuring the LAN Control Settings • If you are in a DHCP environment: 1. Take - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 35
• If the Projector IP Address still does not appear, contact your network administrator. • If the RJ45 cables are not properly connected, the Projector IP Address, Subnet Mask, Default Gateway and DNS Server settings will display 0.0.0.0. Make sure the cables are properly connected and perform the - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 36
control the projector. NOTE: • If you are using Microsoft Internet Explorer, make sure it is version 7.0 or higher. • The screen shots in this manual are for reference only, and may differ from the actual design. • Please pay attention to the limitation of input length (including space and other - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 37
1. Enter the address of the projector in the address bar of your browser and press Enter. 1 2. The main page of the Network Control will appear. Set a password. Password needs to be at least eight single byte characters in length and use a mix of the following 3 types of letters: uppercase letters, - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 38
For the details of AMX Device Discover, visit the AMX web site at http://www.amx.com/. 5. If your projector is connected to a network which supports Simple Mail Transfer Protocol (SMTP), you can configure it to alert you via email on significant events. 6. The Crestron (e-Control)® page displays the - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 39
iii. Please read the Warning message and press the "OK" button to confirm the update. NOTE: If the download process fails, please refer to the "Projector Software Update Firmware by USB" below. A.Visit ViewSonic's website to download the Projector Software Update Firmware : https://www.viewsonic.com - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 40
ii. Upload the LAN Firmware file to the Network Control website. iii. After finishing the LAN Firmware update, please go to Crestron e-Control® page and click the "info" button to check the LAN Firmware version. About Crestron e-Control® 1. The Crestron e-Control® page provides a variety of virtual - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 41
on this projector. i ii iv iii v vi i. This section is only used with the Crestron Control System. Please contact Creston or refer to its user manual for setup information. ii. You can name the projector, keep track of its location and the person in charge of it. iii. You can adjust - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 42
Please pay attention to the limitation of input length (including space and other punctuation keys) in the list blow: Category Item Crestron Control Projector Network Configuration User Password Admin Password Input Length IP Address IP ID Port Projector Name Location Assigned To DHCP (Enabled) IP - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 43
port. Please go to the below website to get the RoomView™ User Guide and more information: http://www.crestron.com/products/roomview_connected_embedded_ projectors_devices/resources.asp PJLink™, SNMP, AMX and Xpanel Formats Supported This projector is PJLink™, SNMP V.1, AMX or Xpanel V1.10 compliant - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 44
section will introduce the On-Screen Display (OSD) Menu and its options. General On-Screen Display (OSD) Menu Operation NOTE: The OSD screenshots in this manual are for reference only and may differ from the actual design. Some of the following OSD settings may not be available. Please refer to the - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 45
On-Screen Display (OSD) Menu Tree Main Menu DISPLAY Sub-menu Aspect Ratio Menu Option Auto 4:3 16:9 16:10 Native Keystone Vertical Horizontal Corner Adj. Top-Right Top-Left Bottom-Right Bottom-Left Position X: -5 ~ 5, Y: - 5 ~ 5 Phase 0~31 H. Size -15~15 Zoom 0.8X ~2.0X - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 46
Main Menu IMAGE Sub-menu Color Temp. Advanced Menu Option 9300K/7500K/6500K Red Gain Green Gain Blue Gain Red Offset Green Offset Blue Offset Color Tint Sharpness Gamma Noise Reduction Color Management Reset Color Settings Auto Power On Reset Cancel Signal Smart Energy CEC Direct Power On Auto - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 47
Main Menu BASIC ADVANCED Sub-menu Audio Settings Presentation Timer Pattern Blank Timer Message Splash Screen 3D Settings HDMI Settings Menu Option Mute Off/On Audio Volume 0~20 Power On/Off Ring Tone Off/On Timer Period 1~240 m Timer Display Always/1 min/2 min/ 3 min/Never Timer - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 48
Main Menu ADVANCED Sub-menu Menu Option LAN Control Settings LAN Settings DHCP ON/Static IP Projector IP Address Subnet Mask Default Gateway DNS Server Standby LAN Control Off/On Apply Light Source Settings Light Source Mode Normal/Eco/ Dynamic Black 1/ Dynamic Black 2/ Custom Light - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 49
Main Menu SYSTEM INFORMATION Sub-menu Language Menu Option Multi-Language OSD Selection Projector Position Front Table Rear Table Rear Ceiling Front Ceiling Menu Settings Menu Display Time 5 sec/10 sec/15 sec/20 sec/25 sec/30 sec Menu Position Center/Top-Left/ Top-Right/ Bottom-Left/ - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 50
DISPLAY Menu 1. Press the Menu button to display the On-Screen Display (OSD) Menu. 2. Press / to select the DISPLAY menu. Then press Enter or use / to access the DISPLAY menu. 3. Press / to select the menu option. Then press Enter to display its sub-menu, or press / to adjust/select the setting. - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 51
Menu Option Aspect Ratio Keystone Corner Adj. Position Phase Description Auto Scales an image proportionally to fit the projector's native resolution in its horizontal width. This is suitable for the incoming image which is neither in 4:3 nor 16:9 and you want to make most use of the screen without - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 52
Menu Option H. Size Zoom OverScan 3X Fast Input Description Adjusts the horizontal width of the image. NOTE: This function is only available when a PC input signal is selected. Magnifies the projected image and allows you to navigate the image. Adjusts the overscan rate from 0% to 5%. NOTE: This - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 53
IMAGE Menu 1. Press the Menu button to display the On-Screen Display (OSD) Menu. 2. Press / to select the IMAGE menu. Then press Enter or use / to access the IMAGE menu. 3. Press / to select the menu option. Then press Enter to display its sub-menu, or press / to adjust/select the setting. NOTE: - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 54
Menu Option Color Mode Brightness Contrast Description Brightest Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required, such as using the projector in well lit rooms. Presentation Designed for presentations under daylight - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 55
Menu Option Color Temp. Description 9300K Images appear bluish white. 7500K Images maintain a normal white appearance. 6500K Images appear reddish white. Advanced Advanced Reset Color Settings To set a custom color temperature, you can further adjust the following items: Red Gain/Green Gain/Blue - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 56
POWER MANAGEMENT Menu 1. Press the Menu button to display the On-Screen Display (OSD) Menu. 2. Press / to select the POWER MANAGEMENT menu. Then press Enter or use / to access the POWER MANAGEMENT menu. 3. Press / to select the menu option. Then press Enter to display its sub-menu, or press / to - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 57
VGA/HDMI cable. You can also select All and the projector will turn on automatically upon receiving either a VGA or HDMI signal. CEC This projector supports CEC (Consumer Electronics Control) function for synchronized power on/off operation via HDMI connection. That is, if a device that also - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 58
Menu Option Standby Settings USB A Power Description The functions below are available in standby mode (plugged in, but not turned on). Audio Pass Through When selecting On, the projector outputs an audio signal when the Audio In and Audio Out sockets are correctly connected to a proper device. - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 59
BASIC Menu 1. Press the Menu button to display the On-Screen Display (OSD) Menu. 2. Press / to select the BASIC menu. Then press Enter or use / to access the BASIC menu. 3. Press / to select the menu option. Then press Enter to display its sub-menu, or press / to adjust/select the setting. NOTE: - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 60
Menu Option Audio Settings Presentation Timer Description Mute Select On to temporarily turn off the projector's internal speaker or the volume being output from the audio output jack. Audio Volume Adjusts the volume level of the projector's internal speaker or the volume being output from the - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 61
Menu Option Pattern Blank Timer Message Splash Screen Description Helps adjust the image size and focus, and checks for distortion in the projected image. Allows the projector to return the image automatically after a period of time when there is no action taken on the blank screen. To display the - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 62
ADVANCED Menu 1. Press the Menu button to display the On-Screen Display (OSD) Menu. 2. Press / to select the ADVANCED menu. Then press Enter or use / to access the ADVANCED menu. 3. Press / to select the menu option. Then press Enter to display its sub-menu, or press / to adjust/select the setting. - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 63
the 3D format, choose a 3D mode. 3D Sync Invert When you discover the inversion of the image depth, enable this function to correct the problem. Save 3D Settings Saves current 3D settings. 3D settings will automatically be applied if the same resolution and input source are selected. NOTE: When the - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 64
is Custom. Reset Light Source Hours Resets the light source timer after new light source is installed. For changing the light source, please contact qualified service personnel. Light Source Hours Information ͫ Light Source Usage Time: Displays the number of hours the light source has been used. 64 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 65
Menu Option Closed Caption Reset Settings Description Closed Caption Enable Activates the function when the selected input signal carries closed captions. NOTE: • Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned ( - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 66
SYSTEM Menu 1. Press the Menu button to display the On-Screen Display (OSD) Menu. 2. Press / to select the SYSTEM menu. Then press Enter or use / to access the SYSTEM menu. 3. Press / to select the menu option. Then press Enter to display its sub-menu, or press / to adjust/select the setting. NOTE: - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 67
Menu Option Description Language Sets the language for the On-Screen Display (OSD) Menu. Projector Position Selects a proper position for the projector. Menu Settings Menu Display Time Sets the length of time the OSD Menu will remain active after your last interaction. Menu Position Sets the - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 68
Menu Option Baud Rate Description Selects a baud rate that is identical with your computer's so that you can connect the projector using a suitable RS-232 cable and control the projector with RS-232 commands 68 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 69
INFORMATION Menu 1. Press the Menu button to display the On-Screen Display (OSD) Menu. 2. Press / to select the INFORMATION menu and display its contents. Menu Option Source Color Mode Resolution Color System IP address MAC address Firmware Version 3X Fast Input S/N Description Shows the current - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 70
Appendix Specifications Item Category LS600W Projector Type LED Display Size 60" ~ 300" Throw Ratio 1.37~1.64 (87"±3%@2.56m) Lens 1.2x±3% Optical Zoom Light Source Type OSRAM LED (RGBB/P2MQ) Display System 1-CHIP DMD Input Signal VGA fh: 15K~102KHz, fv:48~120Hz, Pixel rate: - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 71
Bottom Side-by-Side 28.3221 25.175 31.5 31.5 36 40 50 49.5 56.25 83 Supported Supported Supported Supported Supported Supported Supported 65 75 78.75 94.5 115.5 Supported Supported Supported Supported 108 46.966 51.419 74.25 79.5 Supported Supported Supported Supported Supported Supported 71 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 72
.5 106.5 121.75 162 146.25 30.24 57.28 80 100 148.5 Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported 72 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 73
146.25 Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported 108 135 157.5 108 148.5 85.5 106.5 121.75 162 Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 74
576 31.25 50 27 Supported Supported Supported 720/50p 1280 x 720 37.5 50 74.25 Supported Supported Supported Supported 720/60p 1280 x 720 45 60 74.25 Supported Supported Supported Supported 1080/50i 1920 x 1080 28.13 50 74.25 Supported Supported Supported 1080/60i 1920 x 1080 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 75
60 50 60 50 60 Clock (MHz) 13.5 27 13.5 27 74.25 74.25 74.25 74.25 148.5 148.5 3D Sync Frame Sequential Supported Supported Supported Supported 75 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 76
IR Control Table Key Format On Off COMP HDMI/HDMI 1 HDMI 2 Auto Sync Source Up/ Left/ Enter/ Right/ NEC-F2 NEC-F2 NEC-F2 NEC-F2 NEC-F2 NEC-F2 NEC-F2 NEC-F2 NEC-F2 NEC-F2 NEC-F2 Down/ Menu NEC-F2 NEC-F2 NEC-F2 (INFORMATION) Exit Aspect Freeze Pattern Blank PgUp PgDn (Mute) (Volume Down) ( - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 77
Key (Presentation Timer) VIDEO Format NEC NEC Address Code Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Byte 1 X3 83 Byte 2 F4 F4 Byte 3 27 52 83F4 93F4 A3F4 B3F4 C3F4 D3F4 E3F4 F3F4 Byte 4 D8 AD 77 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 78
RS-232 Command Table Pin Assignment Pin Description Pin 1 NC 2 3 TX 4 5 GND 6 7 RTSZ 8 9 NC Description RX NC NC CTSZ Interface Baud Rate Data Length Parity Check Stop Bit Flow Control RS-232 Protocol 115200 bps (default) 8 bit None 1 bit None Command Table Function Type - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 79
Function Type Action Command Light Source Mode Write Normal 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x10 0x00 0x6D Light Source Mode Write Eco 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x10 0x01 0x6E Light Source Mode Write Dynamic Eco 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x10 0x02 0x6F Light Source Mode - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 80
Function Type Action Command Aspect ratio Write 16:10 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x04 0x04 0x66 Aspect ratio Write Anamorphic 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x04 0x05 0x67 Aspect ratio Write Wide 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x04 0x06 0x68 Aspect ratio Write 2.35:1 0x06 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 81
Function Type Action Color temperature- Read Get value Blue gain Color temperature- Write Decrease Red offset Color temperature- Write Increase Red offset Color temperature- Read Get value Red offset Color temperature- Write Decrease Green offset Color temperature- Write Increase Green gain - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 82
Function Type Action Command Color mode Write Photo 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0B 0x13 0x7C Color mode Write Presentation 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0B 0x14 0x7D Color mode Write Gaming 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0B 0x12 0x7B Color mode Write Vivid 0x06 0x14 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 83
Function Type Action Source input Write Composite Video Source input Read Status Quick Auto Search Write ON Quick Auto Search Write OFF Quick Auto Search Read Status Mute Write ON Mute Write OFF Mute Read Status Volume Write Increase Volume Write Decrease Volume Write Write Value - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 84
Function Type Action Command Light Source Usage Read Get Equivalent 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x15 0x01 Time light source 0x63 Hour Light Source Usage Read Get Usage Time 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x15 0x0A 0x6C Time HDMI Format Write RGB 0x06 0x14 0x00 0x04 0x00 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 85
Function Type Action Command Over Scan Write Value 5 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x33 0x05 0x95 Over Scan Read Get Value 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x11 0x33 0x91 Remote Key Write Menu 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0F 0x61 Remote Key Write Exit 0x02 0x14 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 86
Function Gamma Gamma Gamma Lens Focus Lens Focus Type Action Write sRGB Write Cubic Read Get Value Write Right Write Left Command 0x02 0x14 0x00 0x04 0x00 0x34 0x05 0xCA 0x05 0x20 0x02 0x14 0x00 0x04 0x00 0x34 0x05 0xCA 0x06 0x21 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x05 0xCA 0x1C 0x06 0x14 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 87
levels of the screen image. C CEC (Consumer Electronics Control) Synchronizes power on/off operation via HDMI connection. That is, if a device that also supports CEC function is connected to the HDMI input of the projector, when the projector's power is turned off, the power of the connected device - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 88
the difference between the image background (black level) and the foreground (white level). F Focus Ring Manually improve the clarity of the projected image. G Gamma Allows the user to manually select the greyscale curve of the projector. H HDMI Range Allows the user to select HDMI greyscale - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 89
port or LAN port. S Sharpness Adjusts the picture quality. Standard Mode A Color Mode that is designed for normal viewing circumstances in a daylight environment. Z Zoom Ring Manually adjust the size of the projected image. 89 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 90
Troubleshooting Common Problems This section describes some common problems that you may experience when using the projector. Problem The projector does not turn on There is no picture The image is blurred The remote control does not work Possible Solutions • Ensure the power - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 91
LED Indicators Light Status and Description Green Flashing Green Green Green Flashing Red Green Green Flashing Off Green Off Off Off Off Red Flashing Red Flashing Red Red Green Off Orange Orange Off Off Off Off Off Off Green Off Off Off Red Red Red Red Red Red Flashing Red Red Red Red Red Red - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 92
Maintenance General Precautions • Make sure the Projector is turned off and the power cable is unplugged from the power outlet. • Never remove any parts from the Projector. Contact ViewSonic® or a reseller when any part of the Projector needs replacing. • Never spray or pour any liquid directly onto - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 93
Light Source Information This section will provided a better understanding of your projector's light source. Light Source Hour When the projector is being used, the duration (in hours) of light source usage is automatically calculated by the built-in timer. To obtain the light source hour - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 94
Regulatory and Service Information Compliance Information This section addresses all connected requirements radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 95
The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 96
Computing. Please visit the ViewSonic® website to learn more. USA & Canada: http://www.viewsonic.com/company/green/recycle-program/ Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/ 96 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 97
Copyright Information Copyright© ViewSonic® Corporation, 2020. All rights reserved. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic® and the three birds logo are registered trademarks of ViewSonic® - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 98
Customer Service For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product's serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 99
Limited Warranty ViewSonic® Projector What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 100
, or failure to follow instructions supplied with the product. Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 101
apply to you. Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your found in www.viewsoniceurope.com under Support/Warranty Information. Projector Warranty Term Template In UG VSC_TEMP_2005 101 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 102
or other acts of nature, unauthorized product modification, unauthorized attempted repair, or failure to follow instructions supplied with the product. b. Any damage of the product due to shipment. c. C extended period of time. 4. Removal, installation, insurance, and set-up service charges. 102 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 103
use. Please retain your receipt of proof of purchase to support your warranty claim. For Your Records Product Name Model To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 104
52)33-36-15-15-43 E-Mail: [email protected] Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. Bernardo Reyes, CP 01(52)95-15-13-67-00 E-Mail. [email protected] FOR USA SUPPORT: ViewSonic Corporation 14035 Pipeline Ave. Chino, CA 91710, USA Tel: 800-688 - ViewSonic LS600W - 1280 x 800 Resolution 3 000 ANSI Lumens 1.37-1.64 Throw Ratio - Page 105
Process Color C0 M91 Y72 K24 Process Color C0 M0 Y0 K100 Process Color C0 M91 Y72 K24 Spot Color Spot Color Pantone Black C Pantone 187 C
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
 |
 |
LS600W
Projector
User Guide
Model No. VS18176
Model Name: LS600W
IMPORTANT:
Please read this User Guide to obtain important information on installing and using your product
in a safe manner, as well as registering your product for future service.
Warranty information contained in this
User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right
corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual”