ViewSonic LS800WU LS800HD User Guide English - Page 40
Adjusting 4 corners, Magnifying and searching for details
View all ViewSonic LS800WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Adjusting 4 corners Using the OSD menu Open the OSD menu and go to the DISPLAY > Corner Adj. menu. 1. It will show 4 corner adjustmant OSD on screen. 2. To select the corner you want to adjust than the selected area will show gray color 3. Two degree selection couble be adjust 4. To save the settings before you want to close the OSD menu How to reset the corner adj.: • Press "Auto" to reset. The screen will show "Reset Notice: Do you want to reset? Reset / Cancel". • Adjust the keystone and Aspect Ratio to reset. The screen will back to orignal angle automatically. Magnifying and searching for details If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture. • Using the remote control • Press remote control ( and ) for screen zoom in or zoom out • Using the OSD menu 1. Open the OSD menu and go to the DISPLAY > Zoom menu. 2. Press Enter. The Zoom bar is displayed. 3. To navigate the picture, press Enter to switch to the paning mode and press the directional arrows ( , , , ) to navigate the picture. 4. To reduce size of the picture, press Enter to switch back to the zoom in/out functionality, and press repeatedly until it is restored to the original size. You can also press Auto Sync on the remote control to restore the picture to its original size. The picture can only be navigated after it is magnified. You can further magnify the picture while searching for details. 35