ViewSonic M2e User Guide - Page 15
Mounting the Projector, Maximum Screw Length: 8 mm
View all ViewSonic M2e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Mounting the Projector NOTE: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate. 1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount. 2. Ensure the screws used to attach the mount to the projector meet the following specifications: • Screw type: M4 x 8 • Maximum Screw Length: 8 mm 3. To access the ceiling mount points, remove the three (3) foot pads on the bottom of the projector. CAUTION: • Avoid installing the projector near a heat source. • Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector. 15
15
Moun°ng the Projector
NOTE:
If you buy a third party mount, please use the correct screw size. Screw
size can vary depending on the thickness of the moun°ng plate.
1.
To ensure the most secure installa°on, please use a ViewSonic® wall or ceiling
mount.
2.
Ensure the screws used to a²ach the mount to the projector meet the following
specifica°ons:
• Screw type: M4 x 8
•
Maximum Screw Length: 8 mm
3.
To access the ceiling mount points, remove the three (3) foot pads on the bo²om
of the projector.
CAUTION:
• Avoid installing the projector near a heat source.
•
Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bo²om of
the projector.