ViewSonic N1630W User Guide - Page 25

Getting Started Personal Computer Use the LCD TV as the monitor of your computer. The picture below shows the connection for PC. The LCD TV can also be connected to PC with DVI or HDMI output. Side of TV Rear of TV ENGLISH Connect to an HDMI compatible PC with the HDMI cable VGA 15 Pin cable Audio cable (stereo mini plugs) ☼ • Connect the PC IN jack to the PC using a 15-pin cable and audio cable. • If the PC is connected to TV and no signal has been input from PC for more than 5 seconds, the TV will enter standby mode automatically. PC Timing Reference Chart Mode Aspect Ratio Handling Compatible Input Standard Resolution FS*Full-Screen RGB DOS 720 x 400 @ 70Hz 1366 x 768 Yes VESA 640 x 480 @ 60Hz 1366 x 768 Yes VESA 640 x 480 @ 75Hz 1366 x 768 Yes VESA 800 x 600 @ 60Hz 1366 x 768 Yes VESA 800 x 600 @ 75Hz 1366 x 768 Yes MAC 832 x 624 @ 75Hz 1366 x 768 Yes VESA 1024 x 768 @ 60Hz 1366 x 768 Yes VESA 1024 x 768 @ 75Hz 1366 x 768 Yes VESA 1280 x 768 @ 60Hz 1366 x 768 Yes VESA 1280 x 1024 @ 60Hz 1366 x 768 Yes VESA 1360 x 768 @ 60Hz 1366 x 768 Yes ☼ • This TV's PC VGA input does not support interlaced signals. • For the best picture quality, we recommend that you use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency from a personal computer. Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775 ViewSonic 20 N1630w