ViewSonic PA503S - 3800 Lumens SVGA Home with HDMI and Vertical Keystone User - Page 37
Using the projector in standby mode, Adjusting the sound, Turning off the Power On/Off Ring Tone
View all ViewSonic PA503S - 3800 Lumens SVGA Home with HDMI and Vertical Keystone manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Using the projector in standby mode Some of the projector functions are available in standby mode (plugged in but not turned on). To use these functions, be sure the cable connections are correctly made. For the connection methods, see the Connection chapter. Active VGA Out Selecting On in the POWER MANAGEMENT > Standby Settings > Active VGA Out outputs a VGA signal when the Computer 1 and Monitor Out sockets are correctly connected to devices. The projector outputs the signal received only from Computer 1. Active Audio Out Selecting On in the POWER MANAGEMENT > Standby Settings > Active Audio Out outputs an audio signal when the Audio In and Audio Out sockets are correctly connected to a proper device. Adjusting the sound The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input/output jacks. See "Connection" on page 13 for more details. Muting the sound 1. Open the OSD menu and go to the BASIC > Audio Settings > Mute menu. 2. Press / to select On. Adjusting the sound level 1. Open the OSD menu and go to the BASIC > Audio Settings > Audio Volume menu. 2. Press / to select a desired sound level. If available, you can press level. // on the remote control to adjust the projector's sound Turning off the Power On/Off Ring Tone 1. Open the OSD menu and go to the BASIC > Audio Settings > Power On/Off Ring Tone menu. 2. Press / to select Off. The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power On/Off Ring Tone. 32