ViewSonic PA503W - 3800 Lumens WXGA Home with HDMI and Vertical Keystone User - Page 52
Timing of replacing the lamp, Replacing the lamp, Setting Sleep Timer, Setting Power Saving
View all ViewSonic PA503W - 3800 Lumens WXGA Home with HDMI and Vertical Keystone manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Setting Sleep Timer This function allows the projector to turn off automatically after a set period of time to prevent unnecessary waste of lamp life. 1. Open the OSD menu and go to the POWER MANAGEMENT > Smart Energy menu. 2. Press Enter and the Smart Energy page is displayed. 3. Highlight Sleep Timer and press / . 4. If the preset time lengths are not suitable for your presentation, select Disable. The projector will not automatically shut down in a certain time period. Setting Power Saving The projector lowers the power consumption if no input source is detected after 5 minutes to prevent unnecessary waste of lamp life. You can further decide if you would like the projector to turn off automatically after a set period of time. 1. Open the OSD menu and go to the POWER MANAGEMENT > Smart Energy menu. 2. Press Enter and the Smart Energy page is displayed. 3. Highlight Power Saving and press / . 4. When Enable is selected, the projector lamp will be changed to Eco mode after no signal is detected for 5 minutes. The lamp power will be changed to SuperEco mode after no signal is detected for 20 minutes. Timing of replacing the lamp Please install a new lamp or consult your dealer when the Lamp indicator light lights up. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode. CAUTION The Lamp indicator light and Temperature indicator light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp indicator light or Temperature indicator light still lights up after turning the power back on, please contact your dealer. See "Indicators" on page 48 for details. Replacing the lamp Turn the power off and disconnect the projector from the power outlet. Please contact qualified service personnel for changing the lamp. 47