ViewSonic PA505W PA505W User Guide English - Page 48
Signal, Direct Power On, Auto Power Off, Sleep Timer, Power Saving, Enable, Disable
View all ViewSonic PA505W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3. POWER MANAGEMENT menu Function Description Signal Selecting All allows the projector to turn on automatically once the VGA/HDMI signal is fed through the VGA/HDMI cable. Auto Power On CEC See "Using the CEC function" on page 35 for details. Smart Energy Standby Settings Direct Power On Selecting On allows the projector to turn on automatically once the power is fed through the power cord. Auto Power Off See "Setting Auto Power Off" on page 47 for details. Sleep Timer See "Setting Sleep Timer" on page 47 for details. Power Saving See "Setting Power Saving" on page 48 for details. See "Using the projector in standby mode" on page 36 for details. Selecting Enable you to restart the projector immediately within 120 seconds after turning it off. After 120 seconds, if the projector is not turned on again, it will directly enter the standby mode. Smart Restart It takes some time to initiate this function. Make sure the projector has been turned on for more than 4 minutes. If the projector is resumed by using the Smart Restart feature, this function can be executed immediately. When Enable is selected, the Quick Power Off function will be automatically set to "On". Selecting Enable enables the function and the projector will not enter the cooling process after being shut down. Selecting Disable disables the function and the projector will enter normal cooling process after being shut down. Quick Power Off If you attempt to restart the projector right after it's been turned off, it may not be turned on successfully and will rerun its cooling procedure. When Disable is selected, the Smart Restart function will be automatically turned off. Audio Settings See "Adjusting the sound" on page 36 for details. Presentation Timer Pattern Blank Timer Message Splash Screen See "Setting the presentation timer" on page 33 for details. The projector can display grid test patterns. It helps you adjust the image size and focus and check that the projected image is free from distortion. See "Hiding the image" on page 34 for details. Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. Allows you to select which logo screen will be displayed during projector start-up. 4. BASIC menu 43