ViewSonic PG707X - 4000 Lumens XGA Networkable Projector with 1.3x Optical Zoom - Page 4
Settings > Reset Lamp Hours and press Enter. The notification message will be displayed if
View all ViewSonic PG707X - 4000 Lumens XGA Networkable Projector with 1.3x Optical Zoom and Low Input Lag manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
11. Tighten the screws that secure the lamp cover. CAUTION y Loosen screw may cause a bad connection, which could result in malfunction. y Do not over tighten the screw. 11-1 11-2 Replacing the lamp After powering on the projector, open the OSD menu. Go to ADVANCED > Lamp Settings > Reset Lamp Hours and press Enter. The notification message will be displayed if you want to reset the lamp hours. Highlight Reset and press Enter. The lamp hours will be reset to "0". CAUTION y Do not reset if the lamp is not new or replaced as this could cause damage. 3
3
11. Tighten the screws that secure the lamp cover.
CAUTION
y
Loosen screw may cause a bad connection, which could result in
malfunction.
y
Do not over tighten the screw.
Replacing the lamp
After powering on the projector, open the OSD menu. Go to ADVANCED > Lamp
Settings > Reset Lamp Hours and press Enter. The notification message will be displayed if
you want to reset the lamp hours. Highlight Reset and press Enter. The lamp hours will be reset
to “0”.
CAUTION
y
Do not reset if the lamp is not new or replaced as this could cause damage.
11-2
11-1