ViewSonic PJ588D PJ588D User Guide - Page 38

Maintenance And Security - replacement lamp

Get ViewSonic PJ588D - DLP Hi-Brightness Portable Projector PDF manuals and user guides
UPC - 766907245219
View all ViewSonic PJ588D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

MAINTENANCE AND SECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer. Important: The lamp contains a certain amount of mercury and should be disposed of according to local ordinance regulations. Avoid touching the glass surface of the new lamp: Doing so may shorten its operation life. Warning: Be sure to turn off and unplug the projector at least an hour before replacing the lamp. Failure to do so could result in severe burn. It is recommended that you do not attempt to replace the lamp while the projector is installed on a ceiling. If you do attempt this, wear protective goggles to prevent glass from a ruptured lamp getting into your eyes. 1. Lift the screw covers [A]. Remove the screws on the lamp compartment cover [B]. 2. Lift the lamp compartment cover [C] exposing the lamp module. 31 ViewSonic PJ588D/PJ568D/PJ508D

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
31
ViewSonic
PJ588D/PJ568D/PJ508D
MAINTENANCE AND SECURITY
Replacing the Projection Lamp
The project±on lamp should be replaced when ±t burns out
.
It should only be replaced w±th a
certified
replacement part
,
wh±ch you can order from your local dealer
.
Important
:
The
lamp
contains
a
certain
amount
of
mercury
and
should
be
disposed
of
according
to
local
ordinance
regulations
.
Avoid
touching
the
glass
surface
of
the
new
lamp
:
Doing
so
may
shorten
its
operation
life
.
Warning
:
Be
sure
to
turn
off
and
unplug
the
projector
at
least
an
hour
before
replacing
the
lamp
.
Failure
to
do
so
could
result
in
severe
burn
.
It
is
recommended
that
you
do
not
attempt
to
replace
the
lamp
while
the
projector
is
installed
on
a
ceiling
.
If
you
do
attempt
this
,
wear
protective
goggles
to
prevent
glass
from
a
ruptured
lamp
getting
into
your
eyes
.
1.
Lift the screw covers
[A].
Remove the screws on the lamp com-
partment cover
[B]
.
2.
Lift the lamp compartment cover
[C]
exposing the lamp module.