ViewSonic PJ650 User Manual

ViewSonic PJ650 Manual

Get ViewSonic PJ650 PDF manuals and user guides View all ViewSonic PJ650 manuals
Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJ650 manual content summary:

  • ViewSonic PJ650 | User Manual - Page 1
    PJ650 User Guide Image Size 31" - 300" LCD Projector
  • ViewSonic PJ650 | User Manual - Page 2
    Contents ...2 Component Names ...3 Projector ...3 Remote Control ...4 Using the remote control 5 Putting batteries into the remote control unit 5 Operating the remote control 5 Setting up the projector 6 Adjusting the Projector's Elevator Feet 6 Adjusting the Screen Size and Projection Distance
  • ViewSonic PJ650 | User Manual - Page 3
    ...32 Replacing the Lamp 32 Caring for the Air Filter 33 Caring for the Inside of the Projector 34 Caring for the Lens 34 Caring for the Cabinet and Remote Control Transmitter 34 Troubleshooting ...35 On-screen Messages 35 Panel Lamp Indicators 36 Problem Diagnostics 37 Specifications ...38
  • ViewSonic PJ650 | User Manual - Page 4
    ViewSonic Corporation reserves the right to change product specifications projector's warranty on the Internet at: http://www.viewsonic.com For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: ViewSonic PJ650 VPROJ27747-1W A-CD-PJ650-1 1 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 5
    . If anything is missing, please contact ViewSonic Corp. NOTE: Keep the original packing material for future shipment. Projector Power Cord Video/Audio Cable USB mouse cable Quick Start Guide RGB Video Cable Batteries for Remote Control Remote Control Soft Case CD-Wizard NOTE: Applicable
  • ViewSonic PJ650 | User Manual - Page 6
    button STANDBY/ON button Lens cap AUDIO IN R and L ports VIDEO IN port Zoom knob Focus ring Remote sensor Air filter Elevator button S-VIDEO IN port RGB IN 1 and 2 ports AC power inlet CONTROL port RGB OUT port USB port COMPONENT VIDEO port Elevator button Power switch 3 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 7
    KEYBOARD buttons POSITION button , , , Cursor buttons ESC button SEARCH button STANDBY/ON button AUTO button BLANK button VOLUME button MUTE button KEYSTONE button MENU button RESET button ENTER button REMOTE CONTROL DEVICE ViewSonic PJ650 4
  • ViewSonic PJ650 | User Manual - Page 8
    sunlight or light from an extremely close range (such as from an inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function. Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor. 5 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 9
    Setting up the projector CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual "PJ650 Quick START GUIDE" and this manual. • If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your
  • ViewSonic PJ650 | User Manual - Page 10
    to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen (1024x768 pixels). a: Distance from the projector to the screen (±10%). b: Distance ) 65 (165) 81 (206) 108 (275) 135 (343) 162 (412) Lens center Side view 7 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 11
    system and peripheral equipment (i.e. display devices). • Please use the standard drivers as this projector is a Plug-and-Play monitor. • Plug-and-Play may not function properly with some type of computers. Use the RGB IN 2 port if Plug- and-Play does not function correctly. ViewSonic PJ650 8
  • ViewSonic PJ650 | User Manual - Page 12
    will be using to the projector. 2 Insert the batteries into the remote control. 3 Connect the power cord (1) Connect the connector of the electrical power cord to the AC inlet of the main unit. (2) Firmly plug the power cord's into the outlet. Power outlet AC inlet Power cord 9 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 13
    simultaneous LCD and CRT display). For more information, refer to the instruction manual of the notebook computer. Plug & Play This projector is compatible This projector is recognized as a Plug & Play monitor. Load the driver contained in the CD Wizard included with the unit. ViewSonic PJ650 10
  • ViewSonic PJ650 | User Manual - Page 14
    of the corresponding laptop computer. Laptop computer Desktop computer NOTE: • Some computers may have multiple display screen modes. The use of some of these modes may not be possible with this projector. • For some RGB input modes, the optional Mac adapter is necessary. 11 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 15
    Connecting to a DVD Player or VCR ViewSonic PJ650 12
  • ViewSonic PJ650 | User Manual - Page 16
    RGB OUT RGB cable Connecting to a Display Monitor Display monitor RGB IN 13 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 17
    projector's power is completely on. 4 Remove the lens cap The picture is projected. Control panel NOTE: Turn the power on/off in right order. • Power on the projector before the computer or video tape recorder. • Power off the projector after the computer or video tape recorder. ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 18
    The message "Power off?" will appear on the screen for approximately 5 seconds. 2 Press the STANDBY/ON button again (control panel or remote control) Press the STANDBY/ON button again while the "Power off?" message is visible. The projector lamp goes off and starts cooling down. The POWER indicator
  • ViewSonic PJ650 | User Manual - Page 19
    's control panel Press the INPUT button As illustrated below, each time you press the INPUT button, the projector switches between its input signal ports. Select the signal you wish to project. Use the zoom ring to adjust the screen size Use the focus ring to focus the picture ViewSonic PJ650 16
  • ViewSonic PJ650 | User Manual - Page 20
    , a dialog box will appear on the screen indicating that you have muted the sound. Press the VOLUME button to close the dialog box (Even if you don't do anything, the dialog box will automatically disappear after a few seconds.) Press the MUTE button again to restore the sound. 17 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 21
    the RESET button during adjustment. Press the POSITION button again to close the dialog box and complete this operation. (Even if you don't do anything, the dialog box will automatically disappear after a few seconds.) This function is only available for RGB IN 1/2 input. ViewSonic PJ650 18
  • ViewSonic PJ650 | User Manual - Page 22
    to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting. 3 Automatic Adjustment for Video Input The signal type best suited for the respective input note that it may not function correctly with some input signals. 19 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 23
    Distortions 1 Press the KEYSTONE button As illustrated on the right, a dialog box will appear on the screen to aid you in correcting the distortion. 2 Use the , buttons to select the direction of correcting keystone distortions will vary with the type of input signal. ViewSonic PJ650 20
  • ViewSonic PJ650 | User Manual - Page 24
    restore the screen to normal. (The projector will also automatically exit MAGNIFY projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long. 21 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 25
    the Screen 1 Press the BLANK button The input signal screen is shut off, and a blank screen appears. You can set the blank screen using the menu (from the SCREEN menu, select BLANK). Press the BLANK button again to remove the blank screen, and return to the input signal screen. ViewSonic PJ650 22
  • ViewSonic PJ650 | User Manual - Page 26
    Functions 1 Press the MENU button The menu display appears on the screen. The projector has the following menus: MAIN, PICTURE 1, PICTURE 2, INPUT, SCREEN, and OPTION. Select a menu using the / the selected SHARPNESS] Use the / buttons to adjust the SHARPNESS. or ESC 23 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 27
    button). Available Functions Move Pointer Left click with mouse Right click with mouse Remote Control Operation Use , , , Press ENTER button Press RESET button button USB Mouse/Keyboard Control 1 Connect the projector's USB terminal to the computer using a USB cable. The functions in the
  • ViewSonic PJ650 | User Manual - Page 28
    and press the Return menu to last previous Press the screen button or the ESC button. Execution of settings and or During operation, press the RESET button. (Note that items Perform each operation in accordance with the instructions in the Table. Item BRIGHT CONTRAST ASPECT ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 29
    excessive, the image may not be displayed correctly. In such a case, initialize H SIZE with the RESET button. Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO): LARGE MIDDLE SMALL It is recommended to select SMALL to avoid flicker at the lower part of the picture. ViewSonic PJ650 26
  • ViewSonic PJ650 | User Manual - Page 30
    and vertical frequencies of the signals will be displayed on the initial screen of the INPUT menu. Perform each operation in accordance with the instructions in the Table. Item AUTO VIDEO HDTV SYNC ON G Description and turn SYNC ON G off, and then reconnect the signal. 27 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 31
    ) blue color screen. ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s). TURN OFF: A non-patterned (plain) blue color screen. • The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen several minutes after being displayed. ViewSonic PJ650 28
  • ViewSonic PJ650 | User Manual - Page 32
    but- ton when the screen you want to register is currently being displayed. 2. When the "Move the capture area as you want." message has been displayed, pressing the ESC (or RESET) button will eliminate the In this way, one can prohibit rewrites ("writeovers") of the MyScreen 29 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 33
    the filter. And, always reset the filter time when cleaning or replacing the filter. The message functions will not operate properly if the filter time is not reset correctly. • Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER". ViewSonic PJ650 30
  • ViewSonic PJ650 | User Manual - Page 34
    Maintenance Lamp To order a new lamp unit (Lamp Part # RLU-150-001), contact ViewSonic or your dealer. For the lamp part number, see the Optional Parts in the Specifications in this guide. For contact information, see the Customer Support table in this guide. Before replacing the lamp, turn the
  • ViewSonic PJ650 | User Manual - Page 35
    . 6 Replace the lamp cover, and tighten the 2 screws firmly to lock it in place 7 Slowly turn the projector so that the top is facing up 8 Turn on the projector power, and using the menu, reset the lamp timer • To reset the lamp timer, from the OPTION menu, select LAMP TIME. ViewSonic PJ650 32
  • ViewSonic PJ650 | User Manual - Page 36
    area. Air Filter Cover 3 If the filter is damaged and needs to be replaced, contact your dealer or ViewSonic Corp. Replace the old filter then put the grill back in place. 4 To reset the Filter Timer, turn on the projector power, go to the Option menu then select filter timer. Reset the filter timer
  • ViewSonic PJ650 | User Manual - Page 37
    projector, please have it cleaned and inspected by an authorized Service with your hand. Caring for the Cabinet and Remote Control Transmitter Wipe lightly with gauze or a soft read all the PJ650 Quick START GUIDE in this manual, in order to care for your projector correctly. • Do ViewSonic PJ650 34
  • ViewSonic PJ650 | User Manual - Page 38
    the screen when LAMP REPLACEMENT IS RECOM- the lamp expires or fails. When the lamp does not light, this indi- MENDED. cates that the lamp is no longer functional and should be replaced. Replace the lamp and do not forget to reset the timer. CLEAN THE AIR FILTER AFTER CLEANING AIR FILTER, RESET
  • ViewSonic PJ650 | User Manual - Page 39
    contact a sales store or a service company. The green Simultaneous blinking with the This is a notification that it is time to clean the filter. After cleaning the fil- lamp is lighted red lamp ter, operate the FILTER TIME portion of the OPTION Menu, and perform reset of the FILTER TIME. NOTE
  • ViewSonic PJ650 | User Manual - Page 40
    Problem Diagnostics Before requesting repair, please check the following WHISPER mode is the current setting. Toggle from the WHISPER mode. Lamp is approaching the end Repalce the Lamp Assembly. of its product lifetime. Pictures appear blurry Either the is done to the unit. 37 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 41
    CONTROL 1 USB 1 Optional Parts Lamp:RLU-150-001 ViewSonic offers other accesories including items such as air filters, remote controls, ceiling mounting brackets, manuals, soft cases, etc. Please contact your dealer or ViewSonic for information. Outline Dimension Unit: mm ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 42
    F: 886 2 8242 3668 T: 886 2 2246 3456 F: 886 2 8242 3668 Email [email protected] [email protected] service.eu@ viewsoniceurope.com service.eu@ viewsoniceurope.com [email protected] [email protected] [email protected] [email protected] 39 ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 43
    and exclusions may not apply to you. Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer. Projector Warranty (V3.0) Release Date: May 1, 2002 ViewSonic PJ650 40
  • ViewSonic PJ650 | User Manual - Page 44
    symbol or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed ViewSonic PJ650
  • ViewSonic PJ650 | User Manual - Page 45
    , and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is 13 with regard to "Safety." User Information for all Countries NOTICE: Use the cables which are included with the projector or specified. ViewSonic PJ650 42
  • ViewSonic PJ650 | User Manual - Page 46
    ViewSonic Corporation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
PJ650
User Guide
Image Size 31” - 300”
LCD Projector