ViewSonic PJ650 User Manual - Page 17
Turning On The Power - remote control
![]() |
View all ViewSonic PJ650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Turning On The Power Precautions Connect all devices to be used to the projector prior to turning on the power. WARNING: When the power is ON, a strong light is emitted. Do not look into the lens. 1 Make sure that the power cord is firmly and correctly connected to the projector and outlet. 2 Turn on the projector's power Set the power switch to [ | ] (ON). The projector will go to STANDBY mode and the POWER indicator will light to solid orange. power switch POWER indicator 3 Press the STANDBY/ON button (control panel or remote control) • The projector begins warming up and the POWER indicator blinks green. • The POWER indicator stops blinking and lights to solid green once the projector's power is completely on. 4 Remove the lens cap The picture is projected. Control panel NOTE: Turn the power on/off in right order. • Power on the projector before the computer or video tape recorder. • Power off the projector after the computer or video tape recorder. ViewSonic PJ650 14
![](/manual_guide/products/viewsonic-pj650-user-manual-b74e9d2/17.png)