ViewSonic PJD5352 PJD5152, PJD5352 User Guide (English) - Page 43
SYSTEM SETUP: Basic menu
UPC - 766907431117
View all ViewSonic PJD5352 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
4. SYSTEM SETUP: Basic menu Function Description Language Projector Position Auto Power Off Blank Timer Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 21 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 11 for details. Allows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power Off" on page 44 for details. Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding the image" on page 33 for details. Panel Key Lock Disables or enables all panel key functions except II POWER on the projector and keys on the remote control. See "Locking control keys" on page 33 for details. Timer Controller Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours. Splash Screen Message Quick Cooling High Altitude Mode Allows you to select which logo screen will be displayed during projector start-up. Three options are available: ViewSonic logo, Black screen, or Blue screen. Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. Selecting On enables the function and the projector cooling time will be shortened to a few seconds. If you attempt to restart the projector right after the quick cooling process, it may not be turned on successfully and will rerun its cooling fans. A mode for operation in high altitude areas. See "Operating in a high altitude environment" on page 34 for details. DCR Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic modes according to the input image detected. This function is only available when a PC source is in use. After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation. 5. SYSTEM SETUP: Advanced menu 40 Operation