ViewSonic PJD6211P Service Manual - Page 17
Flash Loader], DLP Composer Lite], Browse], x.img], Start Download], Skip Boot Loader Area], Power - pjd6211 projector lamp
View all ViewSonic PJD6211P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
6. Move the cursor to [Flash Loader] on the Project window of [DLP Composer Lite]. (The [Flash Loader] screen will appear.) 7. Click [Browse] and select where the firmware [xxxxxxxxx.img] is for download. 8. Make sure [Skip Boot Loader Area] is with a check. 9. Press Menu and Power buttons constantly and then give power supply (switch power on). Temp LED and Lamp LED will become amber. That indicates the projector is in the download mode. At this moment, you can release these two buttons. 10. Click [Reset Bus] firstly to check if USB connects well. 11. Click [Start Download]. When the dialog box is displayed, click [Yes]. 2. Put checkmark next to [Skip Boot Loader Area] VALUE SETTING is 32KB 1. Click [Browse] and select [*.img] 3. Click [Reset Bus] to confirm the USB connection is ok. 4. Click [Start Download] ViewSonic Corporation 14 Confidential - Do Not Copy PJD6211