ViewSonic PJD6352LS - 1024 x 768 Resolution 3 500 ANSI Lumens 0.61 Throw Ratio - Page 44
Creating your own startup screen, Operating in a high altitude environment
View all ViewSonic PJD6352LS - 1024 x 768 Resolution 3 500 ANSI Lumens 0.61 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Keys on the remote control are still functional when panel key lock is enabled. If you press Power to turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on. Creating your own startup screen In addition to selecting the projector preset startup screen from among Black, Blue, or ViewSonic screen, you can make your own startup screen that is a picture projected from your computer or video source. To create your own startup screen: 1. Project the picture you want to use as your startup screen from either a computer or video source. 2. Open the OSD menu and go to the SYSTEM SETTING: BASIC > Screen Capture menu. 3. Press Enter. 4. A confirmation message displays. Press Enter again. 5. The message 'Screen Capturing...' displays while the projector is processing the picture. Please wait. 6. If the action is successful, you see the message 'Captured Succeeded' on the screen. The captured picture is saved as Screen Capture and have been set as your current startup screen. In the unlikely event that the capturing action fails, change your target picture. When the resolution of the input signal is higher than the projector's native display resolution (See "Projector specifications" on page 64 for details.), the capture action may fail. When it happens, please set the resolution of the input signal under native resolution and try again. Operating in a high altitude environment We recommend you use the High Altitude Mode when your environment is between 1500 m-3000 m above sea level, and temperature is between 5°C-25°C. CAUTION Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature is between 5°C and 35°C. The projector will be over cooled, if you turn the mode on under such a condition. To activate the High Altitude Mode: Notice 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > High Altitude We recommend you use the High Altitude mode by selecting it whenever your environment is higher than 1500 m. Mode menu. 2. Press / to select On. A confirmation Do you want to turn High Altitude Mode ON? message is displayed. 3. Highlight Yes and press Enter. Yes No Operation under "High Altitude Mode" may cause a higher decibel operating noise level because of increased fan speed necessary to improve overall system cooling and performance. If you use this projector under other extreme conditions excluding the above, it may display auto shut-down symptoms, which is designed to protect your projector from over-heating. In cases like this, you should switch to High Altitude Mode to solve these symptoms. However, this is not to state that this projector can operate under any and all harsh or extreme conditions. 37