ViewSonic PJD6531w PJD6531W-1 User Guide (English) - Page 26

Set or change the password. When the password function is added, image projection will require to input the preset password when turning on the projector. Screen Capture Capture the current projection screen as a start-up screen. Screen Capture Delete Delete the captured projection screen. Start-up Screen Select start-up screen when the projector is powered on or when no signal is input. "User" is the screen that you captured. Zoom Zoom in and out the images. Text shot Using command codes, text messages can be sent for display by the projector over a network connection. Text is shown on the center of the projection screen. This is a great way to display urgent alert messages to employees, and simply requires a connection to the projector's LAN connector. DCR (Dynamic Contrast Ratio) Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable DCR will resume to normal contrast performance. DCR will impact lamp life and system noise performance. Closed Caption Enable or Disable closed captions by selecting CC1 (closed caption1, the most common channel), CC2, CC3, CC4, T1, T2 or OFF. ™ Brilliant Color Produce an expanded on-screen color spectrum that delivers enhanced color saturation for bright, true-to-life images. Suggesting to turn Off for most video sources and On for most computer sources. NetWork Enable or disable network management via RJ45 connector. Message Enable or disable the message box at the right bottom of the screen. Network Config (Computer / Video Mode) DHCP Abbreviation for Dynamic Host Configuration Protocol. This protocol automatically assigns IP Address to networked devices. „ When the "DHCP" sets to "Yes", it takes some time to obtain IP address from DHCP server. „ When the "DHCP" sets to "No", that means user will set IP address by manually. EN-23