ViewSonic PJD7822HDL User Guide - Page 16
Remote control code, Selects an available picture setup mode. - test
View all ViewSonic PJD7822HDL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
12. Magnify Displays the zoom bar that magnifies or reduces the projected picture size. 13. Lock Activates or deactivates panel key lock. 14. Freeze Freezes the projected image. 15. Pattern Displays embedded test pattern. 16. Blank Hides the screen picture. 17. DynamicEco™ Decreases the power consumption of the lamp by up to 30%. 19. Color Mode Selects an available picture setup mode. 20. Exit Goes back to previous OSD menu, exits and saves menu settings. 21. PgUp (Page Up)/PgDn (Page Down) Operates your display software program (on a connected PC) which responds to page up/down commands (like Microsoft PowerPoint) when the mouse mode is activated. 22. Volume keys (+, -) Magnifies or reduces the volume level. 23. It takes some time to initiate this function. Make sure the projector has been If the turned on for more than projector is resumed by 4 minutes. using the 24. Smart Restart feature, this function can be executed immediately. 25. Toggles the projector audio between on and off. Aspect Selects the display aspect ratio. Timer 18. Auto Sync Displays the presentation timer settings Automatically determines the best picture menu. timings for the displayed image. Remote control code The projector can be assigned to two different remote control codes, A or B. When several adjacent projectors are in operation at the same time, switching the remote control codes can prevent interference from other remote controls. Set the remote control code for the projector first before changing that for the remote control. To switch the code for the projector, select A or B in the SYSTEM SETTING: ADVANCED > Remote Control Code menu. To switch the code for the remote control, press PgUp and PgDn buttons on the remote control together for 5 seconds or more. The initial code is set to A. If different codes are set on the projector and remote control, there will be no response from the remote control. When that happens, switch the code for the remote control again. 9