ViewSonic PJD7828HDL - 3200 Lumens 1080p Short Throw Home Theater Projector Us - Page 40
Color Management, To adjust the settings, PICTURE, Advanced, Enter, Primary Color, Saturation
View all ViewSonic PJD7828HDL - 3200 Lumens 1080p Short Throw Home Theater Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc., you can project any image from the disc on the screen and enter the Color Management menu to make adjustments. To adjust the settings: 1. Open the OSD menu and go to the PICTURE > Advanced > Color Management menu. 2. Press Enter and the Color Management page is displayed. 3. Highlight Primary Color and press / to select a color from among Red, Yellow, Green, Cyan, Blue, or Magenta. 4. Press to highlight Hue and press / to select its range. Increase in the range will include colors consisted of more proportions of its two adjacent colors. Please refer to the illustration to the right for how the colors relate to each other. For example, if you select Red and set its range at 0, only pure red in the projected picture will be selected. Increasing its range RED Yellow GREEN will include red close to yellow and red close to magenta. 5. Press to highlight Saturation and adjust Magenta Cyan its values to your preference by pressing / . Every adjustment made will reflect to the BLUE image immediately. For example, if you select Red and set its value at 0, only the saturation of pure red will be affected. Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of "0" removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic. 6. Press to highlight Gain and adjust its values to your preference by pressing / . The contrast level of the primary color you select will be affected. Every adjustment made will reflect to the image immediately. 7. Repeat steps 3 to 6 for other color adjustments. 8. Make sure you have made all of the desired adjustments. 9. Press Exit to exit and save the settings. 35