ViewSonic PS600W PS501W User Guide English - Page 57
HDMI Settings
View all ViewSonic PS600W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4. BASIC menu Function Description Audio Settings See "Adjusting the sound" on page 43 for details. Presentation Timer Pattern Blank Timer Message Splash Screen 3D Settings See "Setting the presentation timer" on page 32 for details. The projector can display several test patterns. It helps you adjust the image size and focus and check that the projected image is free from distortion. See "Hiding the image" on page 34 for details. Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. Allows you to select which logo screen will be displayed during projector start-up. See "Using the 3D functions" on page 35 for details. HDMI Settings See "Changing HDMI input settings" on page 25 for details. Lamp Mode See "Setting Lamp Mode" on page 57 for details. Lamp Settings LAN Control Settings Filter Settings DCR Reset Lamp Hours Resets the lamp timer after new lamp is installed. For changing the lamp, please contact qualified service personnel. Lamp Hours See "Getting to know the lamp hour" on page 57 for details on how the total lamp hour is calculated. See "Controlling the projector through a LAN environment (PS600W/PS600X)" on page 36 for details. See "Using the dust filter (optional accessory)" on page 55 for details. Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode according to the input image detected. This function is only available when a PC input signal is selected. After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation. 5. ADVANCED menu 52