ViewSonic PX725HD - 1920 x 1080 Resolution 2 000 ANSI Lumens 1.5-1.65 Throw Rati - Page 46

Page 46 highlights

4. BASIC menu Function Description Presentation Timer Pattern Blank Timer Message Splash Screen 3D Settings See "Setting the presentation timer" on page 30 for details. The projector can display grid test patterns. It helps you adjust the image size and focus and check that the projected image is free from distortion. See "Hiding the image" on page 31 for details. Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. Allows you to select which logo screen will be displayed during projector start-up. See "Using the 3D functions" on page 32 for details. HDMI Settings See "Changing HDMI input settings" on page 22 for details. Lamp Mode See "Setting Lamp Mode as Eco" on page 44 for details. Reset Lamp Hours Lamp Settings Resets the lamp timer after new lamp is installed. For changing the lamp, please contact qualified service personnel. DCR Lamp Hours See "Getting to know the lamp hour" on page 44 for details on how the total lamp hour is calculated. Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic modes according to the input image detected. This function is only available when a PC input signal is selected. After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation. Caption Version Closed Caption Selects a preferred closed captioning mode. To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language in your area). Returns all settings to the factory preset values. Reset Settings The following settings will still remain: Keystone, OverScan, Language, Projector Position, High Altitude Mode, Security Settings, 3D Settings, ISF Mode. 5. ADVANCED menu 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
41
Function
Description
Presentation
Timer
See
"Setting the presentation timer" on page 30
for details.
Pattern
The projector can display grid test patterns. It helps you adjust
the image size and focus and check that the projected image is
free from distortion.
Blank Timer
See
"Hiding the image" on page 31
for details.
Message
Selecting
On
displays the current information on the screen
when the projector is detecting or searching for a signal.
Splash Screen
Allows you to select which logo screen will be displayed
during projector start-up.
3D Settings
See
"Using the 3D functions" on page 32
for details.
HDMI Settings
See
"Changing HDMI input settings" on page 22
for details.
Lamp Settings
Lamp Mode
See
"Setting Lamp Mode as Eco" on page 44
for details.
Reset Lamp Hours
Resets the lamp timer after new lamp is installed. For changing
the lamp, please contact qualified service personnel.
Lamp Hours
See
"Getting to know the lamp hour" on page 44
for details on
how the total lamp hour is calculated.
DCR
Enables or disables the DCR (Dynamic Contrast Ratio)
function. Selecting
On
enables the function and the projector
will automatically switch the lamp mode between normal and
economic modes according to the input image detected.
This function is only available when a PC input signal is
selected.
After enabling DCR, frequent lamp mode switching may
shorten lamp life and noise level will vary during
operation.
Closed Caption
Caption Version
Selects a preferred closed captioning mode. To view captions,
select CC1, CC2, CC3, or CC4 (CC1 displays captions in the
primary language in your area).
Reset Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone,
OverScan, Language, Projector Position, High Altitude
Mode, Security Settings, 3D Settings, ISF Mode.
4. BASIC menu
5. ADVANCED menu