ViewSonic PX748-4K - 4K UHD Projector with 4000 Lumens 240Hz 4.2ms for Home Thea - Page 56

Page 56 highlights

Menu Option HDR Ultra Fast Input LAN Control Settings (only for PX728-4K/PX748-4K) Description HDR/HLG The projector supports HDR/HLG imaging sources. It can automatically detect the dynamic range of the source, and optimize image gamma and color settings to reproduce contents under wide range of light conditions. You also select SDR. EOTF The projector can automatically adjust the brightness levels of your image according to the input source. Normally, the default setting "Mid" is recommended. If the brightness of the projected image is dark, please use "Low". When giving priority to gradation property, please use "High". The Ultra Fast Input function helps you deliver commands exactly when you want without delay, giving you a competitive advantage when gaming and improving the overall projector gaming experience. When enabled, the following settings will return to factory preset values: Warping, Keystone, Corner Adj., Digital Lens Shift, Zoom. NOTE: This function is only available when a native timing input signal is selected. LAN Settings ͫ DHCP ON: Select this if you are in a DHCP environment and Projector IP Address, Subnet Mask, Default Gateway, DNS Server settings will be automatically retrieved. ͫ Static IP: Select this if you are in a non-DHCP environment and make adjustments to below settings. Projector IP Address Subnet Mask Default Gateway DNS Server Only available when LAN Settings is set to Static IP. Use / to select a column and use / to adjust the value. Standby LAN Control Allows the projector to provide the network function in standby mode. Apply Enacts the settings. 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
56
Menu Option
Description
HDR
HDR/HLG
The projector supports HDR/HLG imaging sources. It can
automatically detect the dynamic range of the source, and
optimize image gamma and color settings to reproduce
contents under wide range of light conditions. You also select
SDR.
EOTF
The projector can automatically adjust the brightness levels
of your image according to the input source. Normally, the
default setting “Mid” is recommended. If the brightness of the
projected image is dark, please use “Low”. When giving priority
to gradation property, please use “High”.
Ultra Fast Input
The Ultra Fast Input function helps you deliver commands
exactly when you want without delay, giving you a competitive
advantage when gaming and improving the overall projector
gaming experience.
When enabled, the following settings will return to
factory preset values: Warping, Keystone, Corner Adj.,
Digital Lens Shift, Zoom.
NOTE:
This func°on is only available when a na°ve °ming input
signal is selected.
LAN Control Settings
(only for
PX728-4K/PX748-4K)
LAN Settings
ͫ
DHCP ON: Select this if you are in a DHCP environment
and Projector IP Address,
Subnet Mask, Default Gateway,
DNS Server settings will be automatically retrieved.
ͫ
Static IP: Select this if you are in a non-DHCP environment
and make adjustments to below settings.
Projector IP Address
Only available when
LAN Settings is
set to Static IP. Use
/
to select a
column and use
/
to adjust the
value.
Subnet Mask
Default Gateway
DNS Server
Standby LAN Control
Allows the projector to provide the network function in
standby mode.
Apply
Enacts the settings.