ViewSonic Pro8510L PRO8800WUL User Guide English - Page 32
Entering the password recall procedure, Changing the password, Disabling the password function
View all ViewSonic Pro8510L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Entering the password recall procedure 1. Press and hold Auto Sync on the remote control for 3 seconds. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local service center to decode the number. You may be required to provide proof of purchase documentation to verify that you are an authorized user of the projector. The "XXX" shown in the above screenshot are numbers that vary depending on different projector models. Changing the password 1. Open the OSD menu and go to the SYSTEM > Security Settings > Change Password menu. 2. Press Enter. The message 'INPUT CURRENT PASSWORD' is displayed. 3. Enter the old password. • If the password is correct, another message 'INPUT NEW PASSWORD' is displayed. • If the password is incorrect, the password error message is displayed lasting for 5 seconds, and the message 'INPUT CURRENT PASSWORD' is displayed for your retry. You can press Exit to cancel or try another password. 4. Enter a new password. 5. Confirm the new password by re-entering the new password. 6. You have successfully assigned a new password to the projector. Remember to enter the new password next time the projector is started. 7. To leave the OSD menu, press Exit. The digits being input will be displayed as asterisks on-screen. Do make a note of your password, and then keep the note in a safe place for later recall. Disabling the password function 1. Open the OSD menu and go to the SYSTEM > Security Settings > Power On Lock menu. 2. Press / to select Off. 3. The message 'INPUT PASSWORD' is displayed. Enter the current password. • If the password is correct, the OSD menu returns to the Security Settings page with 'Off' shown in the row of Power On Lock. You will not have to enter the password next time you turn on the projector. • If the password is incorrect, the password error message is displayed lasting for 5 seconds, and the message 'INPUT PASSWORD' is displayed for your retry. You can press Exit to cancel or try another password. Though the password function is disabled, you need to keep the old password in hand should you ever need to re-activate the password function by entering the old password. 27