ViewSonic VA2252Sm VA2252Sm User Guide English - Page 15
Adjusting the Screen Image
View all ViewSonic VA2252Sm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the on-screen OSD control settings. [1] [2] ▲/▼ Standby Power On/Off Power light Blue = ON Amber = Power Saving Displays the Main Menu or exits the control screen and saves adjustments. Displays the control screen for the highlighted control. Also a shortcut to Input toggle. Scrolls through menu options and adjusts the displayed control settings. Blue Light Filter (▼) / ViewMode (▲) Do the following to adjust the display setting: 1. To display the Main Menu, press button [1]. NOTE: All OSD menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable through the OSD timeout setting in the setup menu. 2. To select a control to adjust, press ▲ or ▼ to scroll up or down in the Main Menu. 3. After the desired control is selected, press button [2]. 4. To save setting adjustments and exit the menu, press button [1] until the OSD disappears. The following tips may help you optimize your display: • Adjust the computer's graphics card to support a recommended timing mode (refer to "Specifications" page for recommended setting specific to your display). To find instructions on "changing the refresh rate", please refer to the graphics card's user guide. • If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible. (The black border around the edge of the screen should barely touch the illuminated "active area" of the display.) 7