ViewSonic VA2746M-LED - 27 Display TN Panel 1920 x 1080 Resolution User Guide - Page 13
Adjusting the Screen Image
View all ViewSonic VA2746M-LED - 27 Display TN Panel 1920 x 1080 Resolution manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. [1] [2] ▲/▼ Standby Power On/Off Power light Blue = ON Orange = Power Saving Displays the Main Menu or exits the control screen and saves adjustments. Displays the control screen for the highlighted control. Also a shortcut to toggle analog and digital connection. Scrolls through menu options and adjusts the displayed control. Audio Adjust (▼) / Brightness/Contrast (▲) Do the following to adjust the display setting: 1. To display the Main Menu, press button [1]. NOTE: All OSD menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable through the OSD timeout setting in the setup menu. 2. To select a control to adjust, press ▲ or ▼ to scroll up or down in the Main Menu. 3. After the desired control is selected, press button [2]. 4. To save the adjustments and exit the menu, press button [1] until OSD disappear. The following tips may help you optimize your display: • Adjust the computer's graphics card to support a recommended timing mode (refer to "Specifications" page for recommended setting specific to your LCD display). To find instructions on "changing the refresh rate", please refer to the graphics card's user guide. • If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible. (The black border around the edge of the screen should barely touch the illuminated "active area" of the LCD display.) 7