ViewSonic VG1930wm User Guide - Page 10
Wall Mounting Optional, To Raise and Lower the display - manual
UPC - 766907228335
View all ViewSonic VG1930wm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Wall Mounting (Optional) To obtain a wall-mounting kit, contact ViewSonic® or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a deskmounted to a wall-mounted display, do the following: Four VESA screw holes 1. Verify that the Power button is turned Off, then disconnect the power cord. 2. Lay the LCD display face down on a towel or blanket. 3. Remove the Plastic Covers from the back of the LCD display. 4. Remove the four screws attaching the base. 5. Remove the Rubber Plugs from inside the four VESA screw holes. 6. Attach the mounting bracket from the VESA compatible wall mounting kit (75 mm x 75 mm distance). 7. Attach the LCD display to the wall, following the instructions in the wall-mounting kit. To Raise and Lower the display You can easily raise and lower the display panel (the head) manually. As you face the front of the display, take hold of each side of the head and pull up or down. The panel should move easily. ViewSonic VG1930wm 7