ViewSonic VP2772 VP2772 User Guide English - Page 11

Quick Installation 1. Connect video cable • Make sure both the LCD display and computer are turned OFF. • Remove rear panel covers if necessary. • Connect the video cable from the LCD display to the computer. Macintosh users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter. To order a ViewSonic® Macintosh adapter, contact ViewSonic Customer Support. 2. Connect power cord (and AC/DC adapter if required) USB DOWN 3.0 Power Cord Audio Out DP Out DisplayPort Mini-DP DVI HDMI USB UP 3. Turn ON LCD display and computer Turn ON the LCD display, then turn ON the computer. This sequence (LCD display before computer) is important. NOTE: Windows users may receive a message asking them to install the INF file. To access the file, please use the directory ":\CD\vsfiles". 4. Insert the ViewSonic CD into the computer's CD drive. If your computer does not have a CD-ROM drive, please refer to Customer Support page. 5. Windows users: Set the timing mode (example: 1024 x 768) For instructions on changing the resolution and refresh rate, see the graphics card's user guide. 6. Link DP Out to other display To link DP Out, please follow the instructions below, *Make sure Graphic Card Requirements DP 1.2 compliant Support 2560 x 1440 resolution Support MST mode DP bandwidth up to 5.4G x4 Lans 4