ViewSonic VP2780-4K - 27 Display IPS Panel 3840 x 2160 Resolution User Guide - Page 18

Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual. Exception: This control does not affect changes made with the Language Select or Power Lock setting. S Setup Menu adjusts On-screen Display (OSD) settings. SAVE AS The OSD save function (include Input source). There are 3 main positions (USER MODE 1, USER MODE 2, USER MODE3), which allows users to save their OSD settings. DISPLAYPORT V1.2  : Switch v1.2 and v1.1 for DISPLAYPORT Version  = DISPLAYPORT V1.2 mode  = DISPLAYPORT V1.1 mode NOTE: If you want to enable 4k 60 Hz with Apple devices or PC when connected via DP, firstly your device(PC, Apple device, NB) must be have a DP1.2 port and support 4k 60 Hz. Secondly, DP 1.2 should be enabled via the OSD. Do the following to adjust the display setting 1. Mult-Picture Step 1: press the '1' on your ViewSonic Monitor bezel, to open the OSD (on screen display) Step 2: Use the arrows to select the 'Manual Image Adjust' feature Step 3: Use the arrow (buttons) to select the 'Multi-Picture' feature Step 4: Next choose from the 'Multi-Picture' options- Quad Windows PBP Top-Bottom PBP Left-Right PIP Step 5: After choosing your 'Multi-Picture' option, repeat steps 1 through 3 to go back to the 'Multi-Picture' options screen. Step 6: Select the 'Source Select' option Step 7: Choose the source you would like to display based on the chosen 'Multi- Picture' option 11